DVR User Manual

User’s Manual

DVR-4TH/8TH/16TH Series

SPECO TECHNOLOGIES 07/10

5.1.7.3 Modem Setup

The DVR-4TH/ 8TH/ 16TH series unit can connect to the internet via an

external installed modem.

Modem Setup

Dial-in Setup

Dial-out Setup

Dial Port Selection

NONE

Dial-in Setup

The Dial-in function enables the user to establish dial-up modem

communication to and from the DVR-4TH/ 8TH/ 16TH series unit for remote

software use. The user is allowed to connect only one modem to a DVR-4TH/

8TH/ 16TH series unit.

For more information on dial-up setting on PC, see appendix Dial-up

Connections via Modem.

NOTE: The Dial-in Service is not available if there is no modem

connected to the unit.

In Network Setup menu, select <Dial-in Setup> and press ENTER to enter the

Dial-in menu. The menu displays as follows.

Dial-in Setup

Dial-in Service

Dial-in Account

Dial-in Password

Server IP

Client IP

Dial-in Idle Time

Dial-in Max Time

OFF

User

XXXX

192.168. 0. 1

192.168. 0. 2

0 Min

Dial-in Service

If the DVR-4TH/ 8TH/ 16TH series unit does not connect to the Internet, the

user can communicate to the unit from a remote PC through a modem as well.

Select <ON> to enable the Dial-in function, or <OFF> to disable.

Dial-in Account

This item enables user to protect access to the unit by establishing or

changing a dial-in user name for modem connection.