OWNER’S MANUAL 1
TABLE OF CONTENTS Introduction........................................................................ 4 Seat Post Setup................................................................. 6 Frame Features.................................................................. 7 Frame Geometry................................................................ 8 Schematic and Specifications............................................ 10 Warranty..................................................................
INTRODUCTION Congratulations on your purchase and welcome to the finest line of suspension bikes available! About this Manual This manual is designed to be used in conjunction with the Bicycle Owner’s Manual and owner’s manuals supplied by the manufacturer of the front and rear suspension components. If you did not receive any of these manuals, download them from the Internet, contact your dealer, or contact us by telephone. There may be more current manuals and technical information available.
INTRODUCTION As activities such as racing, jumping, severe off road riding, and stunt riding are extremely dangerous, SAFETY should always be the first consideration. Don’t ride in the race, ride hard off road, try the jump, or do the stunt, UNLESS YOU CAN DO SO SAFELY. Here are some additional recommendations: • Take lessons from a competent instructor first. • Do jumps or stunts only in areas designated for this type of riding.
SEAT POST SETUP SEATPOST MINIMUM EXTENSION: All Specialized full suspension models with interrupted seat tubes have a small hole to identify the minimum extension allowed for your seatpost. If you cannot see the seatpost tube through this hole, your seatpost is too far extended. If a greater saddle height is required, replace the seatpost with a longer one.
BIG HIT FSR FRAME FEATURES 1. Main Frame 2. Seatstay 3. Chainstay 4. Shock Link 5. Main Pivot 6. Dropout (Horst) Pivot � 7. Shock Link at Seatstay Pivot 8. Shock Link at Frame Pivot 9. Lower Shock Eyelet 10. Upper Shock Eyelet � �� � 11. Shock 12.
BIG HIT FSR FRAME GEOMETRY 1 2 3 4 4 5 5 6 6 7 8 *Top Tube Length **Standover Height Head Tube Length Head Tube Angle (26” Steep) Head Tube Angle (26” Slack) Seat Tube Angle (26” Steep) Seat Tube Angle (26” Slack) BB Height (26” High) BB Height (26” Low) Wheelbase Chainstay Length Small (mm) 578 776 128 68.2º 66.3º 63.1º 61º 387 362 1130 432 Small (in) 22.76” 30.55” 5.04” 68.2º 66.3º 63.1º 61º 15.24” 14.25” 44.49” 17.0” Medium (mm) 597 777 137 68.2º 66.3º 63.1º 61º 387 362 1148 432 Medium (in) 23.
BIG HIT FSR FRAME GEOMETRY 1 5 3 2 8 6 7 4 9
NOTE: Bearing and Bolt Kits are available only through your local Specialized dealer. To retain your warranty and for your safety, all maintenance should be performed by your local Specialized dealer.
SBC LIMITED WARRANTY Specialized Bicycle Components, Inc.
USEFUL PRODUCT LIFE CYCLE Every Specialized bicycle and frameset has a useful product life cycle. The length of that useful product life cycle will vary with the construction and materials of the bicycle or frameset, the maintenance and care the bicycle or frameset receives over its useful product life cycle, and the type and amount of use the bicycle or frameset is subject to.
15130 Concord Circle Morgan Hill, CA 95037 www.specialized.
