S o I IIIE!IELIGIITS WWW UNSUSPECTING COM INSTALLATION INSTRUCTIONS if you experience any diff RHE: instruction did not cover, Ple: e e L] nonautomotive shop Please wear protection before you work on any vehicle. An assistant is useful when removing the front bumper from your ve P be cautions when wal with the bumper or any parts b hing body to prevent Do not make direct contact with t halogen bulbs or the wire assembly until the unit Has cooled down after use. 1.
1. Remove the plastic oip 2. {8) amnion bolts and (2) plastic tins location 14. Remove the (2} plastic clips 15, Remove the metal bracket 16. Remove the front bumper WWW.SPECDRDTUNING.
24. Removed be headlight 26. Place the new headlight in the stock location 28. Replace the plastic clip WWW.SPECDRDTUNING.
29. Replace the headlight bracket 30. Tighten Hmm bolt & 31. Tighten the (2) 10mm bolt 32, Connect the headlight blames Pleads see the * Halo and L. E, 0. headlights installation instructions™ Your headlights don't have Halo and LUE. B You can skip the installation instruction. Tarn Signal 34. Wiring WWW. SRECDTUNING.
47. Tighten the {2) 10mm bolts 48. Replace, (9) plastic sips Please the steps front 1 1048 for the opposite side 49, The installation now is comp WWW. SRECDTUNING.
