SPEC— 1999-2004 w FORD F250 PROJECTOR HEADLIGHTS nmmsrrenTmnne eod INSTALLATION INSTRUCTIONS if you experience any di dies that the instruction did not cover, P : Earl nonautomotive shop Please wear protection before you work on any vehicle. An assistant is useful when removing the front bumper from your v 2 with the bumper or any parts belonging body to prevent %! cautions when woi scratching. Do not mak ect contact with the halogen bulbs or the wire nimbly until the unit Has cooled down after use. 1.
8. Remove the light socket 8. {2) metal retaining clip location 18, Remove the headlight 10. Remove the headlight bulb and shames WWW.SPECDRDTUNING.
11. Connect the headlight harness to the new headlight 12. install the light socket Please see-the “Halogen L, E. D, head fights installation instructions” If your head lights don't have HALO and t.E.D, You can'skip the installation instruction. 13, Install the light sockets 14. Place the new headlight in the stock location i 15, installment metal retaining sip 16. Tighten the (2) phi flips head screws WWW.SPECDRDTUNING.
