Brochure

ManualsBrandsSpears ManualsPVC Ball Valves2" Socket End Connector Set for PVC True Union Ball Valves (Pack of 2)

Thermoplastic Valves Product Guide & Engineering Specifictions

True Union 2000 Industrial Ball Valves

Made in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Page 720

Due to Material Cost Variations, Prices Sub

ect to Chan

e. Check On-line Catalo

www.spearsmf

.com

Sample Engineering Specification

All thermoplastic ball valves shall be True Union 2000 Industrial type manu-

factured to ASTM F 1970 and constructed from PVC Type I, ASTM D 1784

Cell Classification 12454 or CPVC Type IV, ASTM D 1784 Cell Classification

23447. All O-rings shall be EPDM or FKM. All valves shall have Safe-

T-Shear

stem with double O-ring stem seals. All valve handles shall be

polypropylene with built-in lockout mechanism. All valve union nuts shall

have Buttress threads. All seal carriers shall be Safe-T-Blocked

. All valve

components shall be replaceable. All EPDM valves shall be certified by

NSF

International for use in potable water service. All 1/2" through 4" valves shall

be pressure rated to 235 psi, all 6" and 8" Venturied and all flanged valves shall

be pressure rated to 150 psi for water at 73°F.

• Chemical & Corrosion Resistant PVC or

CPVC Construction

• Also Available in Spears

High Purity, Low

Extractable PVC Material

• Interchangeable with all True Union 2000

Valves Mates with Union 2000 Pipe Unions

• High Impact Polypropylene Handle

• Built-in Handle Lockout

• Schedule 80 Full-Bore Design

• Strong, Buttress Thread Union Nuts

• Spears

Double O-ring Safe-T-Shear

Stem Design

• EPDM or FKM O-rings

• Spears

Safe-T-Blocked

Seal Carrier

• Self Adjusting PTFE Floating Seat Design

• Fully Serviceable, Replaceable Components

• Sizes 1/2" - 4" pressure rated to 235 psi

@ 73°F. Sizes 6" and 8" Venturied and all

Flanged to 150 psi @ 73°F.

• EPDM Valves NSF

Certified for Potable

Water use

• Suitable for Vacuum Service

• Assembled with Silicone-Free

, Water

Soluble Lubricants

• Manufactured to ASTM F 1970

Optional Vented Ball Valves

Same valve with special ball vent design for

sodium hypochlorite (bleach) and other chemical

applications where entrapped fluids may form

caustic crystalline residues and pressure build up

from gases developed. Valve has a 1/8" vent hole

in ball to equalize internal fluid pressures. Install

valve with ball vent on the pressure (upstream)

side when in closed position.

Optional Accessories*

•

Retro-Fit End Connector Sets for Valve

Replacement

• Split-Nut Repair Kits for Union Nut Replacement

• Supplemental End Connectors

• Round Safety Handles

• Handle Lockout Ring

• Stem Extension Kits

• Square Operator Nuts

• Multi Mount Valve/Actuation Mounting Kits

• Mini-Mount Actuation Mounting Kits

Quick-View Valve Selection Chart

1) For CPVC, add the letter "C" following the size code of part number listed (e.g.,1829-005C,

1821-005CSR)

2) For Special Ball Vent Design, add the letter "V" before the dash separator (e.g.,1829V-005,

1821V-005CSR)

3) 8" Venturied Valves are 6" ball valves fitted with 6x8 end connector adapters.

* See “BALL VALVE ACCESSORIES” section for details of

individual products.

Valve

Size

O-ring

Material

PVC Part Number

1,2

Pressure

Rating

Socket Threaded SR Threaded Flanged Spigot

1/2

EPDM 1829-005 included 1821-005SR 1823-005 1827-005

235 psi

Non-Shock

Wa t er

@ 73°F

(Flanged

150 psi

Non-Shock)

Wa t er

@ 73°F

FKM 1839-005 included 1831-005SR 1833-005 1837-005

3/4

EPDM 1829-007 included 1821-007SR 1823-007 1827-007

FKM 1839-007 included 1831-007SR 1833-007 1837-007

EPDM 1829-010 included 1821-010SR 1823-010 1827-010

FKM 1839-010 included 1831-010SR 1833-010 1837-010

1-1/4

EPDM 1829-012 included 1821-012SR 1823-012 1827-012

FKM 1839-012 included 1831-012SR 1833-012 1837-012

1-1/2

EPDM 1829-015 included 1821-015SR 1823-015 1827-015

FKM 1839-015 included 1831-015SR 1833-015 1837-015

EPDM 1829-020 included 1821-020SR 1823-020 1827-020

FKM 1839-020 included 1831-020SR 1833-020 1837-020

2-1/2

EPDM 1822-025 1821-025 1821-025SR 1823-025 1827-025

FKM 1832-025 1831-025 1831-025SR 1833-025 1837-025

EPDM 1822-030 1821-030 1821-030SR 1823-030 1827-030

FKM 1832-030 1831-030 1831-030SR 1833-030 1837-030

EPDM 1822-040 1821-040 1821-040SR 1823-040 1827-040

FKM 1832-040 1831-040 1831-040SR 1833-040 1837-040

EPDM 1822-060 1821-060 1821-060SR 1823-060 1827-060

150 psi

Non-Shock

Wa t er

@ 73°F

FKM 1832-060 1831-060 1831-060SR 1833-060 1837-060

EPDM 1822-080 — — 1823-080 —

FKM 1832-080 — — 1833-080 —

Features – PVC, CPVC

This multi-featured, space saving quarter-turn shutoff valve is designed to meet the

demands of today's industrial and chemical processing applications. PVC and CPVC

valves are available in IPS sizes 1/2" through 6" with socket/regular thread, SR (Special

Reinforced) thread, flanged or spigot end connectors and 8" Venturied valve with socket o

flanged ends. Also available in metric socket and BSP thread sizes 1/2" through 2".