Instruction Manual

9AFTER SALES SUPPORT 0345 605 2067
Please read these instructions fully before operating or maintaining your machine
SAFETY INFORMATION
shields in place.
■
Keep hands and feet away
from the cutting attachment
at all times and especially
when switching on the
motor.
■
Before use check the
controls and correct
operation of the product.
■
Before using the product or
after any impact, check for
signs of wear or damage
and repair as necessary.
■
Always disconnect the
product from the power
supply (i.e. remove the plug
from the power supply or
the battery pack):
– whenever leaving the
product unattended;
– before clearing a
blockage;
– before checking, cleaning
or working on the product
– after striking a foreign
object;
– whenever the product
starts vibrating abnormally.
■
Take care against injury to
feet and hands from the
cutting attachment.
■
Always ensure that the
air vents are kept clear of
debris.
■
Never use replacement
parts or accessories not
provided or recommended
by the manufacturer.
■
The product should be
supplied via a
residual current device
(RCD) with a tripping
current of not more than 30
mA.
■
Avoid using the product
in bad weather conditions
especially when there is a
risk of lightning.
■
Position the cord so that it
will not be caught by the
cutting attachment during
operation.
■
Disconnect from the power
supply when the cord
becomes damaged or
tangled.
■
If the cord becomes
damaged during use,
disconnect the cord from
the supply immediately. DO