Instruction Manual

17AFTER SALES SUPPORT 0345 605 2067
OPERATE
v. First cut both sides from the bottom cutting upwards to the
top. This will prevent any of the trimmings falling into the
path of the area still to be cut.
vi. After cutting the sides proceed to the top. Try to keep the
cutting device angled at approximately 15° to the cutting
surface.
vii. Cut in a number of stages if the area being cut is particularly
long to achieve a better result; smaller trimmings will allow
for easy composting.
NOTE: When shaping it is advisable to achieve a trapezoidal
shape. A trapezoidal cut corresponds to the natural growth of
plants and results in optimal hedge growth, as it will expose
more light to the lower end of the hedge.
15°