Instruction Manual

10 AFTER SALES SUPPORT 0345 605 2067
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
NOT TOUCH THE CORD
BEFORE DISCONNECTING
THE SUPPLY.
■
Do not use the product if
the cord is damaged or
worn.
■
Warning! The cutting
elements continue to
move after the product is
switched off.
■
Keep the extension cord
away from the blades at all
times.
■
Only use an extension cord
with conductors of not less
than 1.5mm² or 2.0mm²
and:
- If rubber insulated,
ordinary tough rubber
sheathed flexible cord
(code designation 60245
IEC 53);
- If polyvinyl chloride
insulated, ordinary
polyvinyl chloride sheathed
flexible cord (code
designation 60227 IEC
53).
■
Do not expose the product
to rain.instructions is
considered unauthorized
use and relieves the
manufacturer from his or
her legal liability.
■
Disconnect the product
from the power supply
(i.e. remove the plug from
the power supply or the
battery pack) and check for
damage after use.
■
Disconnect the product
from the power supply (i.e.
remove the plug from the
power supply or the battery
pack) before carrying out
maintenance or cleaning
work.
■
Use only the manufacturer’s
recommended replacement
parts and accessories.
■
Inspect and maintain the
product regularly. Have the
product repaired only by an
authorised service centre or
similar qualified specialist.
■
When not in use, store the
MAINTENANCE AND STORAGE
SAFETY