Instruction Manual

12 13AFTER SALES SUPPORT 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067
ASSEMBLE
Attaching the grass collection box
Place the grass box onto two hooks on machine.
3
OPERATE
Adjusting the cutting height
Cutting height has been set in the 30mm position
when packed. If need adjust the cutting height,
loose wing nut (A) which located on both sides of
the mower. Move roller brackets (B) to the desired
height of cut.
- Tighten the wing nut.
Operating the hand push mower
i. Do not cut wet grass because it tends to stick to
the underbody of the product, preventing the proper
discharge of grass clippings, and it could also cause
you to slip and fall.
ii. Never cut off more than one-third of the total length
of the grass for a healthy lawn. In the autumn, lawns
should only be cut as long as there is growth.
iii. Slowly push the product forward.
iv. Mow in slight overlapping rows. The most effective
pattern for mowing lawns is straight lines along one
of the sides. This will keep the rows even and ensures
that all the lawn is cut without missing any spots.
v. Circle around flower beds. When reaching a flower
bed in the middle of the lawn, cut a row or two around
the circumference of the bed.
vi. Pay special attention when changing direction.
1
2
A
B