ORIGINAL INSTRUCTION MANUAL 40cm hand push Cylinder Lawnmower S40HC Important - Please read these instructions fully before starting assembly AFTER SALES SUPPORT 0345 605 2067 These instructions contain important information that will help you get the best from your mower, ensuring it is assembled correctly and safely.
SPEAR & JACKSON SINCE 1760 CONTENTS Safety Information.................................................................................................... 04 For more than 250 years gardeners have enjoyed high quality performance and great results using Spear & Jackson tools. Our garden power tools combine continuous innovation and the latest in manufacturing technologies with a proud heritage.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine. Please read these instructions fully before operating or maintaining your machine DESCRIPTION OF SYMBOLS GENERAL SAFETY The following warning symbols appear throughout this manual and indicate the appropriate safety measures you should take when operating and maintaining your lawnmower. Warning. Read the instruction manual. Wear gloves protection. Wear proper safety shoes.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine regulations may restrict the age of operator. Never operate the tool under the influence of alcohol, medication or drugs. ■ This product is intended for private use only, not for any commercial applications. It may not be used for any purposes other than those described.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine MAINTENANCE AND STORAGE Cluttered areas and benches can cause accidents. ■ Consider work area environment. Do not expose your tool to high humidity or rain. Do not use your tool in damp and wet conditions. Keep the work area well lit. ■ Mow across the face of slopes; never up and down.
BOX CONTENTS ASSEMBLE PARTS 1 2 3 4 5 6 WARNING! Wear proper gloves! Mower body Mid handle x 2pcs Upper handle with foam grip Lower handle Handle fix bolts X 6 pcs Grass box 7 8 9 Wheel Blade Height adjustment wing nut 1 Unpacking i. Unpack all parts and lay them on a flat, stable surface. ii. Remove all packing materials and shipping devices if applicable. iii. Make sure the delivery contents are complete and free of any damage.
ASSEMBLE 3 Attaching the grass collection box OPERATE 1 Adjusting the cutting height Cutting height has been set in the 30mm position when packed. If need adjust the cutting height, loose wing nut (A) which located on both sides of the mower. Move roller brackets (B) to the desired height of cut. Place the grass box onto two hooks on machine. B - Tighten the wing nut. 2 A Operating the hand push mower i.
MAINTENANCE Maintenance and Repair WARNING! Cylinder mowers have a difficult time with tall weeds such as dandelions which most times will cause the weeds to bend and not cut – cut often to prevent this. Cylinder mowers are relatively low maintenance. For consistent cutting follow the below instructions: - Always keep the cutting bar properly adjusted. Refer to the instruction manual for further directions. - Regularly clean and lubricate the cutting edges with light spray oil.
MAINTENANCE Storage and transportation WARNING! Do not place hands in the mower near blades. If grass cuttings are compacted in the blade area, remove using a wood or plastic cleaning tool appropriate for the cleaning of the blades. 1. Clean the exterior of the machine thoroughly using a soft brush and cloth before storing. Do not use water, solvents or polishes. MAINTENANCE can dispose of your garden waste in an environmentally friendly manner. 4.
TROUBLESHOOTING TECHNICAL DATA Model Cutting width Variable cutting heights Grass collection box Volume Weight 18 AFTER SALES SUPPORT 0345 605 2067 S40HC 400mm 15-42mm Suspected malfunctions are often due to causes that the user can fix themselves. Therefore, check the product using this section. In most cases the problem can be solved quickly.
WARRANTY If your device develops a fault, please don’t hesitate to contact our customer service department on 0345 605 2067, the majority of problems can be solved directly on the phone. 1. These warranty terms cover additional warranty rights and do not affect your statutory warranty rights. All our products are covered by a 3 year manufacturer warranty. 2. Claims must be accompanied by proof of purchase.
