Instruction Manual

9
AFTER SALES SUPPORT 0345 605 2069
BRUSH CUTTER SAFETY
WARNINGS
SAFETY INFORMATION
or modified. Damaged or
modified batteries may exhibit
unpredictable behaviour resulting
in fire, explosion or risk of injury.
f) Do not expose a battery
pack or tool to fire or
excessive temperature.
Exposure to fire or temperature
above 130 °C may cause
explosion.
g) Follow all charging
instructions and do
not charge the battery
pack or tool outside the
temperature range specified
in the instructions. Charging
improperly or at temperatures
outside the specified range may
damage the battery and increase
the risk of fire.
6) Service
a) Have your power tool
serviced by a qualified repair
person using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
b) Never service damaged
battery packs. Service of
battery packs should only be
performed by the manufacturer
1. Do not use the machine when
the operator is tired, ill or under
the influence of alcohol or other
drugs.
2. Keep a firm footing and
balance during operating. Use
the harness provided.
3. Replace cutting blade if
cracked, chipped, or damaged
in any way. Be sure the blade is
properly installed and securely
fastened. Failure to do so can
cause serious injury.
4. Keep away from cutting
blade. Even after the motor has
stopped, the cutting blade will
continue to rotate for several
seconds. Please wait until cutting
blade has fully stopped before
putting the machine down or
accessing the cutting area.
5. Switch off the machine
when not cutting. Never leave
the machine running when
unattended.