ORIGINAL INSTRUCTION MANUAL 36V 2 in 1 Brush Cutter with Grass Trimmer S36GCBC Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your Brush Cutter with Grass Trimmer, ensuring it is assembled correctly and safely.
SPEAR & JACKSON SINCE 1760 For more than 250 years gardeners have enjoyed high quality performance and great results using Spear & Jackson tools. Our garden power tools combine continuous innovation and the latest in manufacturing technologies with a proud heritage. Each product is carefully designed with performance,comfort and durability firmly in mind,which has earned Spear & Jackson an enviable reputation as a maker of tools to trust.
CONTENTS Safety information -------------------------------------------------------------------------04 Contents -----------------------------------------------------------------------------------11 Assembly ----------------------------------------------------------------------------------12 Preparation---------------------------------------------------------------------------13 Operation-------------------------------------------------------------------------------14 Maintenance----------------------------
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine DESCRIPTION OF SYMBOLS The following warning symbols appear throughout this manual and indicate the appropriate safety measures you should take when operating and maintaining the Pole Hedge Trimmer.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Do not burn Do not expose to rain or water For indoor use only Read the operator’s manual. T 2A Fuse Positive terminal Negative terminal Double insulation GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool.Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
SAFETY INFORMATION operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
SAFETY INFORMATION connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times.
SAFETY INFORMATION e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc.
SAFETY INFORMATION or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion. g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
SAFETY INFORMATION GENERAL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The appliance is only to be used with the power supply unit provided with the appliance. IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Safe operating practices 1. Training a) Read the instructions carefully.
SAFETY INFORMATION 5) whenever the machine starts vibrating abnormally. g) Take care against injury to feet and hands from the cutting means. h) Always ensure that the ventilation openings are kept clear of debris. i) Never fit metal cutting elements. j) Always be sure of your footing on slopes. k) Walk, never run. l) Not overreach and keep the balance at all times.
SAFETY INFORMATION swallowed. g) Keep battery pack clean and dry. h) Wipe the battery pack terminals with a clean dry cloth if they become dirty. i) Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure. j) Do not maintain battery pack on charge when not in use. k) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
SAFETY INFORMATION the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Additional safety instructions for your Battery Charger 1.Before charging, read the instructions. 2. Do not charge a leaking battery. 3.
CONTENTS PARTS 14 Left shaft 1 Right handle 2 Lock-off button 15 Clamp Knob 3 Trigger 16 Clamp 4 Right shaft 17 Left handle 5 Safety guard 18 Lower shaft 6 Trimmer head 19 3-teeth blade 7 Line 20 Blade nut cover 8 Line cutter 21 Locking Nut 9 Battery pack 22 Hex wrench 10 Battery pack pins 23 Shaft lock rod 11 Upper shaft 24 Screw 12 Shoulder strap ring 25 Charger 13 Shoulder strap 26 Allen wrench 9 19 10 20 21 12 11 1 2 13 22 23 14 3 17 15 16 18 4 5 25 26
ASSEMBLY WARNING: Never operate the tool without the safety guard firmly in place. The guard must always be on the tool to protect the user. WARNING: When the tool is equipped with a trimmer head, the line cutter should be mounted onto the safety guard. Failure to comply will result in overly long cutting line and overload the motor. Never use the trimmer head without guard accessory. WARNING: If any parts are damaged or missing, do not operate the brush cutter until the parts are replaced.
ASSEMBLY 2 ATTACHING THE SHOULDER STRAP Put on the shoulder strap. (See Fig. B) Fig.B 3 MOUNTING THE SAFETY GUARD The sheet metal is preassemble. Insert the sheet metal into the safety guard groove. (See Fig. C1) Align the three bigger mounting holes in safety guard and shaft base. Lock the safety guard onto the shaft base with screw bolt. Then align the side holes on safety guard and screw them firmly together with Hex wrench(21). (See Fig.
ASSEMBLY 5 ADJUSTING CUTTING LINE LENGTH The trimmer head allows the operator to release more cutting line without stopping the motor. As line becomes frayed or worn, additional line can be released by lightly tapping (See. Fig. E1) on the ground while operating the trimmer (See. Fig. E2) NOTICE: Line release will become more difficult if the line cutter becomes too dull. NOTICE: The original line length is 330mm. There are two kinds of cutting width When the line cutter is mounted on the location as Fig.
ASSEMBLY 6 REPLACE THE TRIMMER HEAD WITH THE 3-TEETH BLADE (THE TRIMMER HEAD IS FIXED IN THE TOOL IN THE ORIGINAL PACKING ) Insert and keep the shaft lock rod into the hole of trimmer head and loosen the trimmer head by screwing it clockwise. Take away the trimmer head. (See Fig. F1) 1) Stick the stop rod (22) into the hole on the side of trimmer head. 2) Loosen the trimmer head by clockwise. 3) Take away the trimmer head. First Keep the lower plate(c) stay on the tool, take away the upper plate(d).
OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless action of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product.
OPERATION 2 HOLDING THE MACHINE Hold the tool with both hands on the right side of your body. The trimmer head or blade should be parallel to the ground at a proper cutting distance without the operator bending over. (See. Fig. H) Releasing the tool can be achieved in two ways;. Release the strap buckle or press the hook of the strap and take it apart from the tubing clip fixed on the shaft WARNING: When emergency occurs, take it off from your shoulder immediately, no matter what way the strap is in.
MAINTENANCE 3) Hold the trimmer head just above the ground at an angle of about 30°. (See. Fig. J1) 4) Move the product with slow and regular horizontal movements from the right to the left and then lead it back to starting point before trimming the next row. (See. Fig. J2) 5) Trim in steps when the grass is very high. Do not cut the total height in once. (See. Fig.
MAINTENANCE 5 TO REPLACE THE LINE 5.1 To replace the spool and line complete For your convenience it is recommended you buy spool and line complete. Remove old spool.(See. Fig. F1) Place new spool into cutting head. Release one line from cleat and feed line through eyelet. Repeat for second line. Refit the cap. Fig.L1 5.2 To replace the line only WARNING: Your Trimmer is designed to use only line with a maximum diameter of 2.0mm IMPORTANT - Always wind the line onto the upper section of the spool first.
MAINTENANCE WARNING: Before inspecting, cleaning or servicing the unit, wait for all moving parts to stop, and remove the battery pack. Failure to follow these instructions can result in serious personal injury or property damage. WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician.
FOR BATTERY TOOLS The ambient temperature range for the use and storage of tool and battery is 0oC-45oC. The recommended ambient temperature range for the charging system during charging is 0oC-40oC.
TECHNICAL DATA 2 in 1 brush cutter with grass trimmer S36GCBC Rated voltage 2*18V Motor type brushed Brush cutter Blade diameter 230mm No load speed 5800/min Grass trimmer Line length 2*2.5m Line diameter 2.0mm Cutting width 330mm/380mm No load speed 5300/min Charger (ACG218W2) Charger input 100-240V~50/60Hz 50W Charger output 18V 2.0A Battery (ABP118W7) Battery capacity 2.
TECHNICAL DATA Noise Information of Brush cutter A weighted sound pressure LpA=77dB(A) KpA=3.0dB(A) A weighted sound power LwA =97dB(A) KwA=3.0dB(A) Wear ear protection. Vibration Information Typical weighted vibration ah = 3.7 m/s2 Uncertainty K = 1.9 m/s² Noise Information of Grass Trimmer A weighted sound pressure LpA=95dB(A) KpA=2.57dB(A) A weighted sound power LwA =95dB(A) KwA=2.57dB(A) Wear ear protection. Vibration Information Typical weighted vibration ah = 3.2 m/s2 Uncertainty K = 1.
ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
WARRANTY If your device develops a fault, please don’t hesitate to contact our customer service department on 0345 605 2069, we can solve 80% of problems via the phone. 1. These warranty terms cover additional warranty rights and do not affect your statutory warranty rights. All our products are covered by a 3 year manufacturer warranty. 2. Claims must be accompanied by proof of purchase.
