Instruction Manual

40 41AFTER SALES SUPPORT 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067
TROUBLESHOOTING
Problem Possible cause Solution
Product does not
start
• Battery pack not properly at-
tached
• Battery pack discharged
• Battery pack damaged
• Other electrical defect to the
product
• Atach properly
• Remove and charge the battery
pack
• Check by a specialist electrician
• Check by a specialist electrician
Product does not
reach full power
• Battery pack capacity too low
• Air vents are blocked
• Remove and charge the battery
pack
• Clean the air vents
Unsatisfactory result
• Accessory is worn
• Accessory not suitable for
intended operation
• Replace with a new one
• Use suitable accessory
Product suddenly
stops
• Product overloaded
• Battery pack discharged
• Battery pack too hot
• Remove the product from the
workpiece and switch it on again
• Remove and charge the battery
pack
• Remove the battery pack and let
it cool down
Excessive vibration
or noise
• Accessory is dull / damaged
• Bolts/nuts are loose
• Replace with a new one
• Tighten bolts/nuts
TECHNICAL DATA
Model No. S3635CC
Nominal voltage of product with battery 2x18V 2.0Ah Li-ion
Chain speed 8.5m/s
Bar length 350mm(14”)
Bar/chain code Oregon, 90PX052X / 144MLEA041
Net weight 3.8kg
Oil tank capacity 150ml
Vibrations Rear handle: 4.92m/s
2
, K=1.5m/s
2
Front handle: 2.57m/s
2
, K=1.5m/s
2
Battery pack
Model No. B0P-SP07-18-D(5INR19/65)
Battery voltage 18V , Li-ion
Battery capacity 2.0Ah
Part Number Accessories
1970ZA0026 Bar
1970ZA0027 Chain
S3635cc-01 Battery
S3635cc-02 Charger
Charger
Model No. B0Q-SP07-2040ZB
Input voltage & power 220-240V AC, 50/60Hz 120W
Output voltage & current 21V , 4A