Instruction Manual

27AFTER SALES SUPPORT 0345 605 2067
OPERATE
Edging
i. Adjust the vertical angle of trimmer head to 0 degree by
pressing the tilt adjustment pedal.
ii. Adjust the trimmer head to 90 degrees for edging by
pressing the locking button.
iii. Twist the plant protector to an angle of 90°.
90
o
90
o
Install the battery to product
i. Keep the battery pack in line with the holder on the
device.
ii. Push it forward until it reaches the bottom. Before
starting make sure the battery pack is firmly locked
in place.
Remove the battery from product
i. Press the battery pack release button downward,
ii. Pull the battery pack towards operator, then remove
it.