Instruction Manual

17AFTER SALES SUPPORT 0345 605 2067
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
damaged.
■
Always check the good
working order of the
trimmer which, if not
adequate, could endanger
the user.
■
Never operate the trimmer
with damaged guards or
without the guards in place.
■
Before starting the trimmer,
make sure that the nylon
line is not touching stones
or debris.
■
Take care against injury to
feet and hands from the
cutting means.
■
Take care against injury
from the cutter blade fitted
for trimming the filament
line length. Switch on the
motor only when the hands
and feet are away from the
cutting means.
■
Never fit metal cutting
elements.
■
Never use replacement
parts or accessories not
provided or recommended
by the manufacturer.
■
Remove the battery before
checking, cleaning or
working on the trimmer and
when it is not in use.
■
Always ensure that
ventilation openings are
kept clear of debris.
■
To avoid unintentional
starting, do not carry the
machine with a finger on
the on/off switch.
■
Remain in a stable and
secure position while
operating the trimmer.
■
Keep the area being cut
free from wires, stones and
debris.
■
Do not cut against hard
objects. This could cause
injury or damage the
trimmer.
■
Warning! Cutting elements
continue to rotate after the
motor is switched off.
■
Do not try stopping the
cutting device (nylon line)
with your hands. Always let
it come to a stop by itself.
■
Do not use the trimmer to
cut grass which is not in
contact with the ground; for
example do not cut grass
which is on walls or rocks