Instruction Manual

14 15AFTER SALES SUPPORT 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067
5
6
ASSEMBLY
7
Connecting garden hose and inlet connector.
Attach a hose with a quick connect coupling
(not included) to the high pressure washer.
OFF position.
Make sure the ON/OFF switch is in the
OFF position.
Connecting to socket.
Insert the mains plug into the socket.
8
Telescopic handle
Push the button on side, and uplift the handle.
2
1
WARNING - Wear suitable clothing, ear and eye
protection when working with the equipment.
Ensure that the mains voltage value matches the
label on the equipment.
Stopping
i. Release the trigger, and engage the safety lock.
ii. Set the On/Off switch to OFF.
iii. Close water supply.
ATTENTION! Risk of machine damage!
Never operate the machine without the water being
connected as dry running may damage the pump.
Use a water lter if the inlet water is contaminated.
Starting
i. Put the high pressure washer on level ground.
Stand in a secure and stable position.
Ii. Open the water supply.
iIi. Unlock the safety trigger on the spray gun and press the
trigger until there is a steady stream of water.
iv. Set the On/Off switch to ON.
Before starting
i. Check the machine for visual defects.
Ii. Check that all parts of the machine have been securely fitted.
iIi. Check if the water connector and the high-pressure hose
are tight.
OPERATION
ON
9
Hose Reel
Befor using, release the hose to proper length.