Instruction Manual

8 9AFTER SALES SUPPORT 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
■
High-pressure hose
fittings and couplings are
important for the safety
of the appliance. Use
only hose fittings and
couplings supplied by the
manufacturer.
■
Inadequate extension
cords can be dangerous. If
an extension cord is used,
it should be suitable for
outdoor use, and be kept
dry and off the ground. It
is recommended that this
is accomplished by means
of a cord reel which keeps
the socket at least 60 mm
above the ground.
■
The electric supply
connection shall be
made by a qualified
electrician and comply
with IEC 60364-1. It is
recommended that the
electric supply to this
machine should include
either a residual current
device that will interrupt
the supply if the leakage
current to earth exceeds
30 mA for 30 ms or a
device that will prove the
earth circuit.
■
Disconnect from the
electrical power supply
before carrying out user
maintenance.
■
Do not use the machine if
a supply cord or important
parts of the machine are
damaged, e.g. safety
devices, high pressure
hoses, trigger gun.
■
If extension cable is used,
the plug and socket outlet
must be of a watertight
construction.
■
If the supply cord is
damaged, it must
be replaced by the
manufacturer or its
service agent or a similarly
qualified person in order to
avoid a hazard.
■
The PVC or
polychloroprene sheathed
power cord or extension
cables (H05VV-F) are
acceptable for use at
temperatures at or above
0°C.
OPERATING SAFETY
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
■
Never carry the appliance
by the cable or the hose.
Do not carry the equipment
with your finger on the
On/Off switch when it is
connected to the mains.
WARNING
Remove plug from socket:
- When you are not using
the equipment.
- When transporting
equipment.
- When left unattended.
- When checking or
cleaning equipment.
- When removing
blockages or performing
maintenance or changing
accessories.
- When cable is damaged.
- After contact with foreign
bodies.
- If the machine begins to
vibrate abnormally.
■
Do not use the appliance
near flammable liquids
or gases. In case of non-
observance, there is a risk
of fire or explosion.
■
Ensure that the mains
voltage matches the
information on the label.
■
Before each use check the
equipment, power cable
and plug for damage, to
avoid an electrical shock.
■
Damaged cables, coupling
and plugs or connecting
leads that are not compliant
with specifications are not
to be used. Remove the
plug from the plug socket
immediately in case of
damage or cutting through
of the mains cable.
■
Do not use the equipment
when the switching action
of the On/Off switch is
impaired. Have damaged
switches replaced at our
Service Centre.
■
Do not overload your
appliance. Work only within
the indicated range of
performance. For heavy
work, do not use a machine
with insufficient power. Do
not use your appliance for
purposes other than those
specified.