Instruction Manual

8 9AFTER SALES SUPPORT 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067
SAFETY INFORMATION SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous
in the hands of untrained
users.
■
Maintain power tools.
Check for misalignment or
binding of moving parts,
breakage of parts and any
other condition that may
affect the power tool’s
operation. If damaged,
have the power tool
repaired before use. Many
accidents are caused by
poorly maintained power
tools.
■
Keep cutting tools sharp
and clean. Properly
maintained cutting tools
with sharp cutting edges
are less likely to bind and
are easier to control.
■
Use the power tool,
accessories and tool bits
etc. in accordance with
these instructions, taking
into account the working
conditions and the work to
be performed. Use of the
power tool for operations
different from those
intended could result in a
hazardous situation.
■
Stay alert, watch what
you are doing and use
common sense when
operating the machine. Do
not use the machine while
you are tired or under the
influence of drugs, alcohol
or medication.
■
Use personal protective
equipment such as dusk
masks and non-skid safety
shoes. Always wear eye
protection.
■
Prevent unintentional
starting. Ensure the switch
is in the off -position
before connecting to
power source and/or
battery pack, picking up or
carrying the tool.
Please read these instructions fully before operating or maintaining your machine
■
Do not carry the machine
with your finger on the
switch .
■
Remove any adjusting key
or wrench before turning
the machine on. A wrench
or a key left attached
to a rotating part of the
machine may result in
personal injury.
■
Do not overreach. Keep
proper footing and balance
at all times.
■
Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair,
clothing and gloves away
from moving parts. Loose
clothes, jewellery or long
hair can be caught in
moving parts.
■
If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these
are connected and
properly used. Use of
dust collection can reduce
dust-related hazards.
■
Warning! Switch off,
remove plug from mains
before adjusting, cleaning
or if cable is cut, damaged
or entangled.
■
The blades continue to
rotate for a few seconds
after the machine is
switched off.
■
The operating voltage is
230-240V~, 50Hz. If you
want to use an extension
cable should not be lighter
than:
- if rubber insulated, or
ordinary tough rubber
sheathed flexible cord
-if polyvinyl chloride
insulated, ordinary
polyvinyl chloride
sheathed flexible cord
(code designation H05 VV-
F) and the following cable
dimensions should be
used:
• 1.0mm²: max. length 40m
• 1.5 mm²: max. length 60m
• 2.5 mm²: max. length 100m
PERSONAL SAFETY