Instruction Manual

6 7AFTER SALES SUPPORT 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067
SAFETY INFORMATION SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine
the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust
or fumes.
■
Keep children and
bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
ELECTRICAL SAFETY
■
The plug must match the
outlet. Never modify the
plug in any way. Do not
use any adapter plugs with
earthed (grounded) power
tools.Unmodified plugs
and matching outlets will
reduce the risk of electric
shock.
■
Avoid body contact with
earthed or grounded
surfaces, such as pipes,
radiators, ranges and
refrigerators. There is an
increased risk of electric
shock if your body is
earthed or grounded.
■
Do not expose power
tools to rain or wet
conditions. Water entering
a power tool will increase
the risk of electric shock.
■
Do not abuse the cord.
Never use the cord
for carrying, pulling or
unplugging the power tool.
Keep the cord away from
heat, oil, sharp edges or
moving parts. Damaged or
entangled cords increase
the risk of electric shock.
■
When operating a power
tool outdoors, use an
extension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use
reduces the risk of electric
shock.
■
If operating a power
tool in a damp location
is unavoidable, use a
residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
The maximum operating
current of the RCD must
be less than 30mA.
■
The voltage indicated
on the rating plate must
correspond to the voltage
of the power source.
■
Only use or replace power
supply cables for this unit
which correspond to the
types indicated by the
manufacturer. See the
operating instructions for
the order no. and types.
■
Never touch the mains
plug with wet hands.
■
Do not run over, crush
or pull the power supply
cable or extension lead,
otherwise it may be
damaged. Protect the
cable from heat, oil and
sharp edges.
■
The extension lead must
have a cross section
in accordance with the
operating instructions
and be protected against
splashed water. The
connection must not be in
water.
POWER TOOL USE AND CARE
■
Do not force the power
tool. Use the correct
power tool for your
application. The correct
power tool will do the job
better and more safely
when operated at the rate
for which it was designed.
■
Do not use the power
tool if the switch does
not turn it on and off. Any
power tool that cannot be
controlled with the switch
is dangerous and must be
repaired.
■
Disconnect the plug from
the power source and/
or the battery pack from
the power tool before
making any adjustments,
changing accessories,
or storing power tools.
Such preventive safety
measures reduce the risk
of starting the power tool
accidentally.
■
Store idle power tools out
of the reach of children