Instruction Manual

20 21AFTER SALES SUPPORT 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067
ASSEMBLE
Connection to the power supply
i. Connect the plug to the main socket.
6
OPERATE
MOWING TIPS
■ Verify that the lawn is free of stones, sticks, wires ,and
other objects that could damage the lawn mower.
■ When cutting thick grass, reduce walking speed in order
to allow for a more effective cut and a proper discharge
of the clippings.
■ Never cut off more than one-third of the total length of
the grass for a healthy lawn. If it is roughly 6cm long, the
grass should not be shorter than 4cm once mowed. If
the grass is higher, you should gradually cut it down to
the desired length so as not to damage the grass.
■ Do not cut wet grass because it tends to stick to the
underbody of the lawn mower, preventing the proper
discharge of grass clippings.
Cutting position Cutting height
1 20mm
2 30mm
3 40mm
4 50mm
5 60mm
IMPORTANT NOTE
This mower is tted with a motor thermal protection device to
protect the motor when it( or the blade) shuts down (or block) during
operation, for whatever reasons .
Procedure to follow when the protection device is triggered:
- release the switch lever
- disconnect the extension lead
- check what caused the blade to suddenly come to a halt(clean
the cutting chassis)
- allow the machine to cool down in a cool environment around 5
minutes
1
2
2
60 mm 20 mm