Install Sheet

INSTALLATION GUIDE: ROMAN TUB GROUPING
[e-mail] 02.22.19
|
92-WB-RTG-02
CALIFORNIA PROPOSITION 65:
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www. P65Warnings.ca.gov.
Wash hands after installation, repair, or removal of this product.
SPRAY WAND
LARGE HOSE WASHER
SPRAY HOSE
HOSE HOLDER
WIDESPREAD HOSE
SMALL HOSE WASHER
SPRAY HOSE
SPRAY HOSE INSTALLATION
4
SPRAY HOSE INSTALLATION:
• Connect Widespread Hoses to Valve Bodies
and Spout Tee.
• Assemble Hose Holder to Surface.
• Insert Spray Hose into Hose Holder and
assemble with Washer to Spout Tee.
• Assemble Spray Wand with Washer to Spray
Hose.
4
TURN ON WATER AND FLUSH
THE SYSTEM.
Flush lines thoroughly in tub flow diverter
position.
6
CONFIRM PROPER INSTALLATION
Check for leaks and proper operation. Lift
Diverter Rod to activate Hand Shower.
7
ASSEMBLE WATER SUPPLY LINES.
Connect water supply lines to valve bodies.
Caution: Use wrench or pliers to hold faucet
inlet adapters when tightening supply line
nuts to prevent twisting copper tubing or
damaging solder joints.
5
Accepts a 3/8”
Compression
Fitting
*SUPPLY STOPS NOT INCLUDED
1
5
5