Installation Guide

[e-mail] 07.03.19
|
92-W2151-01
INSTALLATION GUIDE: COMMERCIAL KITCHEN FAUCET
2
Accepts a 3/8”
Compression
Fitting
*SUPPLY STOPS NOT INCLUDED
1
3
TURN OFF WATER SUPPLIES.
Ensure mounting surface requirements are
as follows:
• Single Hole Mounting: (Ø 1-1/4” Min to
Ø 1-5/8” Max)
1
MOUNT UNIT ON KITCHEN SINK.
Place Hoses one at a time through mounting
hole. Lower Faucet into position. If installing
optional deckplate, place hoses through
deckplate first. Secure with Rubber Washer,
Metal Washer, and Mounting Nut. Final tighten
screws of Mounting Nut with Phillips
Screwdriver.
2
ASSEMBLE WATER SUPPLY LINES.
Inlet supplies are 3/8" Compression. Secure
to water supply and wrench tighten.
3
1
1
4
"
MIN
1
5
8
"
MAX