Installation Guide

[e-mail] 02.22.19
|
92-WB-WLF-02
INSTALLATION GUIDE: WIDESPREAD MOUNTED
LAVATORY FAUCET
1
1
4
"
MIN
1
1
2
"
MAX
6”
3” MIN
TURN OFF WATER SUPPLIES.
Ensure mounting surface requirements are
as follows:
• Three (3) Hole diameter sizes = 1-1/4” Min.,
1-1/2” Max.
• Center distance between holes = 3” Min.
(6” between Hot and Cold valves)
• Surface thickness = 1” Max.
1
SPOUT INSTALLATION:
Remove Mount Nut and Mount Bracket from
spout assembly. Assemble Spout to sink
surface. Re-assemble spout Mount Nut and
Mount Bracket to Spout Shank and tighten.
Assemble Spout Tee (with washer) to Spout
Shank and tighten.
2
VALVE BODY INSTALLATION:
Remove Handles and Flanges from valve
body assemblies. From bottom side of sink,
insert Valve Bodies with Mount
Nuts/Washers through surface holes.
From top side of sink, assemble Flanges onto
bodies and hand tighten. Tighten body
Mount Nuts and Screws to secure valve
bodies. Reassemble Handle to Valve body
ensuring proper alignment in the "OFF"
position.
3
1
2
3