Specification
01-JULY 2020
Heated Bidet Toilet Seat
TS-9000
• Installs on most elongated toilets using common household
tools; includes all hardware, mounting plate and AC adapter
• Looks and feels like a traditional toilet seat: push button
activates the bidet nozzle when you need it, tucks away
when you don’t
• Three bidet water rinse options for the ultimate in hygiene
• Anti-bacterial bidet nozzle self-cleans after use
• Built-in nightlight and deodorizer enhance the functionality
• Air with 6 variable temperature settings
• Heated seat with 6 dierent temperature options
• 6 water temperature adjustments and 5 water levels to
choose from
• Quiet open and close seat
• Safety features built in: seat temperature automatically
lowers a level after 1min 10sec to prevent overheating
• Remote control + remote wall hanger included
(batteries included)
FEATURES:
800-537-2107
800-977-2747
WWW.SPEAKMAN.COM
Architect/Engineer Approval Space:
P:
F:
W:
R:
1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. 2. Contractor to supply necessary inlet connections. 3. Only fits
on an elongated toilet.
SPECIFICATIONS:
MAIN UNIT
Rated Voltage AC 110-120V; 50/60Hz
Rating Power 960W
Water Pressure Range
11.6PSI to 116PSI
Electrical Cord 4ft (1.2m) length
Adapter is a GFCI
Water Proof IP4
CLEANSING DEVICE
Heating Method Instant Heat
Heating Power 1400W (120V)
Antibacterial Material Anti-Bacterial Nozzle
Water Temperature
Adjustable Water Temperature Settings :
86°F - 104°F.
Safety Device : thermistor
Spray (Water) Volume 0.106GPM to 0.132GPM gpm
Cleansing Mode
Rear Cleansing/Massage
Front (Feminine) Cleansing
Spray Nozzle Location Adjustment Settings: 5
Water Pressure Range
Rear Cleansing/Massage: 20-80PSI
Front (Feminine) Cleansing: 20-80PSI
Antifouling Features
Swift Water Discharge Device
Automatic Cleaning Nozzle
Anti-Siphon
Anti-Backflow
Filter
Safety Features
Water Temperature Sensor
Dry Heating Protection
Thermostat, Temperature Fuse
Ground Fault Protection
Leakage Protection
Anit-Freeze Protection
Pressure Stabilizer
Information continues on next page
DRYER
Warm Air Volume Air Flow Volume: over 7ft³/min (0.2m³/min)
Warm Temperature Adjustable Air Temperature Settings: 91°F - 136°F
Heating Power 200W
Safety Features Bimetallic Thermostat, Temperature Fuse
Temperature Sensor
HEATED BIDET SEAT
Surface Temperature
Adjustable Surface Temperature Settings: 86°F
- 106°F
Heating Power 50W
Seat Close Mechanism Quiet Slow Close
Burn Protection
Seat temperature will slowly begin lower after
1min 10 sec. of sitting until reaching the lowest
level
Safety Features Seating Sensor
Temperature Sensor
Bimetallic Thermostat, Temperature Fuse
High Temp Cut-O
Anti-Bacterial Feature Anti-Bacterial Seat
Night Light Assembly Intelligent: day/light - o; night/dark - on
Deodorization TiO2 (Titanium Dioxide) photocatalysis