Instructions / Assembly

1
B
C
OFF
A
Turn OFF water supplies (A). Lift handle of
Filter (B). Rotate Filter counter-clockwise
while holding the Rotational Dial stationary
(C).
2
Once Filter is released, pull upward to
remove from the Fill Valve.
3
Clean Filter by rinsing under running water.
4
A
B
ON
C
MAINTENANCE: FILL VALVE FILTER CLEANING
Insert the Filter into the Fill Valve while
aligning the Tabs (A). Rotate Filter
clockwise while holding the Rotational Dial
stationary until Filter locks into position
(B). Turn ON water supplies (C).
TROUBLESHOOTING
Issue: Water surface is too high or too low
Cause: Inlet Valve is not adjusted to the desired position.
Solution: Adjust water level by following the “Water Level Adjustment” section.
Issue: Inlet Valve does not turn on
Cause: Water Supply is off.
Solution: Turn on Water Supply. If Fill Valve is still not functional, turn off Water
Supply and clean Filter Screen by following the “Filter Cleaning” section
in this manual.
Issue: Inlet Valve does not turn off
Cause: Refill Tube wasn’t installed properly.
Solution: Re-install the Refill Tube by following Step 4 of the “Fill Valve Install”
section.
PRODUCT WARRANTY
Speakman will, at its election, repair, replace, or make appropriate adjustment where Speakman's inspection discloses any
such defects occurring in normal usage. Damage caused by accident, misuse, or abuse is not covered by this warranty.
Improper care and cleaning will void the warranty. Use of Chlorine or chemically related components will void the
warranty. Proof of purchase (original sales receipt) must be provided to Speakman with all warranty claims. Speakman is
not responsible for removal, installation, labor charges, or other incidental or consequential costs. In no event shall the
liability of Speakman exceed the purchase price of the toilet.
*Mechanical Component Limited Warranty varies based on component affected. Please call 1-800-537-2107 for additional information.
CALIFORNIA PROPOSITION 65
CALIFORNIA PROPOSITION 65:
WARNING: This product can expose you to chemicals including lead, which is known to
the State of California to cause cancer and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov
Wash hands after installation, repair, or removal of this product.
COMPLIANCE
CONNECTIONS
ASME A112.19.2/CSA B45.1
cUPC certified
WaterSense certified
ADA compliant
3/8” Compression (Inlet Hose Connection - Included)
12” Rough-In to wall
T-5001 ROUGH-IN DIAGRAM
WALL
28-3/8” (720mm)
18-1/2” (470mm)
16-1/2”
(420mm)
12”
(305mm)
28-3/4”
(730mm)
16-3/8” (415mm)
SUPPLY
AS
REQ’D
8-5/8”
(220mm)
6”
(152mm)
COMPLIANCE
CONNECTIONS
ASME A112.19.2/CSA B45.1
cUPC certified
WaterSense certified
ADA compliant
3/8” Compression (Inlet Hose Connection - Included)
12” Rough-In to wall
T-6000 ROUGH-IN DIAGRAM
WALL
28-3/4” (730mm)
18-1/2” (470mm)
16-1/8”
(410mm)
12”
(305mm)
29-1/2”
(750mm)
18-1/8”(460mm)
SUPPLY
AS
REQ’D
8-5/8”
(220mm)
6”
(152mm)