Spec Sheet

SPEAKMAN

400 ANCHOR MILL ROAD

NEW CASTLE, DE 19720

800-537-2107

800-977-2747

WWW.SPEAKMAN.COM

OCTOBER 2017

Architect/Engineer Approval Space:

FEATURES:

• Versatile shower system includes Sentinel Mark II® concealed

anti-scald balanced pressure valve with integral diverter and

integral stops and hand held spray combination.

• Chrome plated brass wall plate with metal index.

• Chrome plated brass lever handle. Independent center sleeve

allows up to 1 in. of rough-in variation.

• Adjustable temperature limit stop. Brass body.

• Pressure balancing and ceramic temperature regulating

cartridge with built-in check valves.

• Can be installed back-to-back. Roughing-in template.

• Four port valve with 1/2 in. female copper sweat inlets and shower

outlet (½ in. female NPT tub outlet).

• Swivel arm holder.

• S-2500 shower arm and wall ﬂange.

• S-1554 tub spout. 60 in. metal hose, chrome ﬁnish.

• In-line vacuum breaker.

• 24 in. combination slide bar and grab bar, stainless steel and

chrome, with mounting screws.

• VS-100-PC handshower with ﬂow control device reduces ﬂow

to 2.5 gpm (9.46 L/min)

FINISH:

COMPLIANCE:

• Meets ASSE 1016 & ASME 112.18.1/CSA B125.1 standards

(SM-3400 valve)

OPTION:

• Contractor Packs Available

WARRANTY:

• 5 year limited

SM-3490-ADA

Versatile™ Pressure Balance Handicap Shower/Tub Combination

PAGE 1
SM-3490-ADA Versatile™ Pressure Balance Handicap Shower/Tub Combination FEATURES: •V ersatile shower system includes Sentinel Mark II® concealed anti-scald balanced pressure valve with integral diverter and integral stops and hand held spray combination. • Chrome plated brass wall plate with metal index. •C hrome plated brass lever handle. Independent center sleeve allows up to 1 in. of rough-in variation. • Adjustable temperature limit stop. Brass body.
PAGE 2
DIMENSIONS: Architect/Engineer Approval Space: 56 NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. 2. Unless otherwise specified all inlets and outlets are 1/2” female copper sweat. 3. The location of the slide bar is optional, but restricted by the 69” hose length running from the shower arm bracket connection to hand shower and note #4. 4. See ICC/ANSI A117.