Installation

SF-8700/SF-8800/SF-8702/SF-8802 REPAIR PARTS
ITEM NO. PART NO. DESCRIPTION
RPG05-108059 0.5 GPM AERATOR REPAIR KIT
RPG45-110196 MOUNTING HARDWARE GROUP
RPG76-107259 TRANSFORMER 120VAC TO 6VDC
NOTES:
COMPLIANCE:
CONNECTIONS:
ASME A112.18.1/CSA B 125.1
Supply Connection:
9/16"-24 UNF Connection
FLOW DATA:
• 0.5gpm (1.9 L/min)
2
1
4
"
57mm
2
15
16
"
75mm
3"
MAX DECK
THICKNESS
6
7
8
"
174mm
6
3
8
"
163mm
1 1/4"
MIN DECK
HOLE SIZE
15.00°
4
5
8
"
117mm
2"
MIN. TO LEDGE
51mm
2"
MIN. TO WALL
51mm
LAVATORY ROUGH-IN
32mm
1
1
4
"
MIN
SF-8700/SF-8800/SF-8702/SF-8802 ROUGH-IN DIAGRAM
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS
OTHERWISE SPECIFIED. DIMENSIONS SUBJECT TO
CHANGE WITHOUT NOTICE.
SF-8700/SF-8800/SF-8702/SF-8802 CARE AND CLEANING
1) Your SENSORFLO
®
Faucet is designed and engineered in accordance with the highest
quality and performance standards. With proper care, it will provide years of hygienic
and trouble-free service.
2) Periodically, the Faucet will require some minor maintenance to keep it at peak
performance. There is a low battery indicator located on the Sensor on the Faucet body.
When the low battery light on the Sensor blinks, it indicates that the battery is low. To
replace the batteries, follow the installation instructions in the electrical connections section
of this document.
3) Periodically clean the In-Line Filter.
4) The polished chrome finish of your Faucet should be cleaned using mild soap and
warm water.
5) Dry immediately with a soft, clean cloth for best results.
6) NEVER use abrasive cleaners, chemicals, alcohol or other solvents. They may damage
the surfaces of the non-chrome plated finishes.