Installation

7
Secure Bracket to wood structure (i.e. wall stud)
or similar using the supplied screws.
Note: If not mounting directly into a wood structure use
appropriate hardware capable of supporting item.
8
Attach remaining end of Hose to the base of
the Eyewash. Wrench tighten.
9
The eyewash is activated by squeezing the
Handle (1) until it locks into the ON position.
To deactivate, the Handle is squeezed while
lifting the Stay-Open Plunger (2).
ROUGH-IN DIAGRAMS / REPAIR PARTS
SPEAKMAN
®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
8"
203mm
4"
102mm
WALL BRACKET
(SUPPLIED W/#10
WOOD SCREWS)
TWIN HEAD
AUTO STAY-
OPEN EYEWASH
6 FT (20m) HOSE
VACUUM
BREAKER
COLD INTEGRAL
STOP SPINDLE
& RETAINING
NUT REMOVED
SERVICE SINK
FITTING
3"
77mm
10"
253mm
1
1
2
"
39mm
33" (83.8CM) TO 45"
(114.3CM) TO FLOOR
6
1
4
"
161mm
RPG38-0390 - Yellow Spray Head Assembly
RPG45-0033 - Rubber Seat Washer And Screw
Note: Dimensions shown are for SPEAKMAN SC-5811
service sink. Dimensions shown for reference only.
NOTE: If not mounting directly into a wood structure
use appropriate hardware capable of supporting item.