Installation
From beneath countertop, slide the rubber mounting washer, then
brass mounting washer over the mounting studs. Thread two (2) brass
nuts onto mounting studs. Align faucet square to sink and tighten
mounting nuts.
Locate the other blue hose attached to faucet, and connect it to the “F”
port on the the supply tee. Tighten.
Retrieve the 6” long blue hose from the box and connect it to the
remaining port off the tee. Tighten.
Locate blue supply hose with the tag reading “EYEWASH”. Connect
to the “E” port of the supply tee (with check valves) and tighten.
1
2
3
3
4
5
6
CAUTION: HOSES PROVIDED INCLUDE RUBBER COMPRESSION
WASHERS FOR SEALING. DO NOT OVERTIGHTEN.