Installation

6/98
92-1531
Rev-2
MAINTENANCE
Should you need parts to repair this unit, please
reference the parts list below for correct part
numbers. Before any maintenance is done be
sure to shut the water supply off.
WARNING: Use only genuine Speakman
parts when repairing or replacing
components. To order parts call 1-800-537-
2107.
SE-912-T REPLACEMENT/REPAIR PARTS
ITEM PART/GROUP # DESCRIPTION
1 20-0895 1-1/2” Bronze
Ball Valve W/
Square Stem
2 04-0494 1-1/2” Ball Valve
Stop Plate
3 04-0362-RCP Cast Brass Handle
4 01-0788 Nut For 1-1/2” Ball
Valve
FLOW DATA
VALVE:
FLOW PRESSURE PSI (BAR) 5 (.34) 10 (.69) 15 (1.03) 20 (1.38) 25
(1.72)
FLOW RATE GPM (LPM) 38 (144) 62 (235) 74 (280) 86 (326) 97 (367)
NOTE: This unit should be connected to an uninterrupted source of potable water, with a minimum flowing
pressure of 20 PSI and a maximum static pressure of 125 PSI.
Note: All units meet existing
ANSI Z358.1 1998
Standards and OSHA Rules.
Product improvements may
cause specification and
dimensional changes
without notice.
SPEAKMAN COMPANY
The Quality leader Since 1869
P.O. Box 191, Wilmington, DE 19899-0191 USA
1-800-537-2107, Fax: [phone]