Installation

SPEAKMAN COMPANY
SE-910-SSBV Installation, Maintenance & Operation Instructions
DESCRIPTION
Stay-open ball valve for eye and eye/face washes.
SPECIFICATIONS
VALVE: 1/2” NPT Female Stainless Steel. Stay-Open Ball Valve.
INLET: 1/2” NPT Female.
OUTLET: 1/2” NPT Female.
SHIPPING WEIGHT: 1 lb. (.454 kg)
INSTALLATION
Assemble unit in desired position. Connect a water supply to the unit (use pipe sealant on all joints) that is a 1/2” minimum
uninterrupted source of potable water. Failure to use potable water can result in emergency units producing impure or
contaminated water causing possible further injury.
OPERATION
The valve is activated by pushing the push handle back 90°. The unit will continue to discharge water until the push handle is
manually pulled back to the off position.
TESTING PROGRAM
The American National Standards Institute (ANSI) states that all safety emergency equipment shall be activated on a weekly
basis to flush the line and verify proper operation. Speakman Company furnishes a testing record tag
(91-0635) with each unit. On this tag the date of inspection and the inspectors initials should be noted.