Spec Sheet
All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice.
800-537-2107
800-977-2747
WWW.SPEAKMAN.COM
Architect/Engineer Approval Space:
P:
F:
W:
R:
Management Systems Registered to ISO 9001
Heat Traced Combination Shower with Eye/Face Wash System
SE-7000
• 3 Year Limited Warranty (commercial)
Visit www.speakman.com for full product warranty information
WARRANTY:
• Wrapped with heat trace cable, insulation,
easy access shell to protect to –50°F
• Activated by Powder coated high visibility yellow,
aluminum triangular pull rod
• 8 in. Diameter yellow plastic showerhead
• Freeze Valve activates automatically below 40°F
• 1 in. NPTF chrome plated brass stay-open ball valve
• 1 in. IPS galvanized steel pipe
• 1 in. NPT male, bottom supply inlet
• 20 gpm @ 30 psi
EYEWASH FEATURES:
• (2) yellow plastic spray outlets with automatic flow control
and flip-top dust caps
• ½ in. NPT, 3-way chrome plated brass ball valve
• 4.5 gpm @ 30 psi
• Stainless steel push handle activation
EYE/FACE WASH FEATURES:
• Self-regulating heating cable with braided metal shield
• Preset, hermetically sealed single pole contact switch.
Temperature range 60º to 70º F thermostat
• Closed cell rubber foam insulation
• NEMA 4X water tight and dust tight, suitable for indoor or
outdoor locations junction box
• 120 vac, 60 cycle, single phase
• Electrical Classification Class 1 Division 2 GRP. B, C, D
• Ground Fault Protection: Installation will require minimum
30 mA GFPD
ELECTRIC:
Add sux to model #
Integral:
• Drench hose option ❑ -DH
• Immersion well thermometer ❑ -IT
• Scald protection valve ❑ -SPV
• 1 in. union ❑ -UN1
Field Installed Accessories:
• Pilot light ❑ -PL
• Pilot light: Class 1 Division 2 areas ❑ -PL-C1D2
• Area light: Class 1 Division 2 areas - clear globe ❑ -VPL-C1D2
OPTIONS:
• ANSI/ISEA Z358.1 certified
STANDARDS:
01-APRIL 2021
Information continues on next page