Installation

ManualsBrandsSpeakman ManualsPlumbingLifesaver Collection 20 GPM Ceiling Mounted Emergency Shower with Wall Activator, in Polished Chrome

SPEAKMAN

400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747

05/03/16 speakman.com 92-SE-237-238-01

SPEAKMAN

SE-237, SE-238

Installation, Maintenance, Operation Instructions

SAFE-T-ZONE® EMERGENCY RECESSED WALL SHOWER

DESCRIPTION

Emergency deluge shower unit with wall recessed activator. Shower is supplied with a 1” NPTF stay-open full

flow ball valve that is activated by pull handle that is recessed inside wall cabinet.

SE-237 SPECIFICATIONS

SHOWER HEAD: 10” DIAMETER STAINLESS STEEL FLANGED. SHOWER HEAD DESIGNED TO MOUNT

FLUSH WITH CEILING.

CABINET: 18 GAUGE (.048 THK.) STAINLESS STEEL.

VALVE: 1” NPT FEMALE BRASS, CHROME-PLATED. FULL FLOW STAY-OPEN BALL VALVE.

ACTIVATOR: STAINLESS STEEL LEVER WITH BLACK PLASTIC ROTATING HANDLE.

PIPING: 1” IPS STEEL PIPING & UNIONS.

INLET: 1” NPTF.

SHIPPING WEIGHT: 15 LB.

EMERGENCY SIGN: 7-7/8” X 12” PLASTIC WALL SIGN.

SE-238 SPECIFICATIONS

SHOWER HEAD: 8” DIA. STAINLESS STEEL. SHOWER HEAD DESIGNED TO DROP DOWN

THROUGH CEILING.

CABINET: 18 GAUGE (.048 THK.) STAINLESS STEEL.

VALVE: 1” NPT FEMALE BRASS, CHROME-PLATED. FULL FLOW STAY-OPEN BALL VALVE.

ACTIVATOR: STAINLESS STEEL LEVER WITH BLACK PLASTIC ROTATING HANDLE.

PIPING: 1” IPS STEEL PIPING & UNIONS.

INLET: 1” NPTF.

FLOW CONTROL: 20 GPM.

SHIPPING WEIGHT: 15 LB.

EMERGENCY SIGN: 7-7/8” X 12” PLASTIC WALL SIGN.

INSTALLATION

1. At desired location of shower. Cut 9-1/4” X 17-1/16” rough in opening in wall as shown in fig. 1.

Please make note of piping & valve orientation as seen in fig. 2 before moving forward with

any piping installation.

Summary of content (4 pages)

PAGE 1
SPEAKMAN ® SE-237, SE-238 Installation, Maintenance, Operation Instructions SAFE-T-ZONE® EMERGENCY RECESSED WALL SHOWER DESCRIPTION Emergency deluge shower unit with wall recessed activator. Shower is supplied with a 1” NPTF stay-open full flow ball valve that is activated by pull handle that is recessed inside wall cabinet. SE-237 SPECIFICATIONS SHOWER HEAD: 10” DIAMETER STAINLESS STEEL FLANGED. SHOWER HEAD DESIGNED TO MOUNT FLUSH WITH CEILING. CABINET: 18 GAUGE (.048 THK.) STAINLESS STEEL.
PAGE 2
. Be sure that all water supplies are shut off before beginning any piping installation. 3. Install supply piping (supplied by others) and valve & union assembly (supplied) as shown in fig. 2. Make sure that before unions are tightened for the last time, that the stainless steel lever handle is as close to perpendicular to the finished wall as possible. Use pipe sealant on all pipe joint connections (not union connections). 4.
PAGE 3
7. Assemble showerhead to 1” pipe as shown in fig. 5. Make note that ANSI specifies that showerhead must be 82”-96” from the surface on which the user stands. SE-238 ROUGH-IN 8” SHOWER HEAD SE-237 ROUGH-IN 10” SHOWER HEAD 8. Install sign. 9. Turn water supply on. 10. Test unit to verify performance. OPERATION The shower is activated by pulling/pushing the recessed handle in the downward direction to the full open position.
PAGE 4
WARNING: Use only genuine Speakman parts when repairing or replacing components. To order parts call 1-800-537-2107. REPLACEMENT/REPAIR PARTS ITEM PART/GROUP # 1 RPG20-1985 DESCRIPTION 2A SE-830 10” Brass Shower head 2B SE-820 8” Stainless Steel Shower Head 1” Ball Valve (Shown in Fig. 2) FLOW DATA SHOWER: FLOW PRESSURE PSI (BAR) FLOW RATE GPM (LPM) 20 (1.38) 20 (75) 60 (4.