Installation

13
Place Drain into the open position by pressing
downward on the Pivot Rod (1). Insert Lift Rod
(2) into Strap (3). Adjust height of Lift Rod (2),
and tighten Thumb Screw (4).
14
Turn on water supplies. Activate faucet and flush
both HOT and COLD water for 1 minute.
15
Turn OFF faucet and install Aerator with
supplied Aerator Wrench.
SB-1004 REPAIR PARTS
ITEM NO. PART NO. DESCRIPTION
RPG05-0986 CARTRIDGE AND RETAINING NUT
RPG05-0989 1.5 GPM VANDAL RESISTANT AERATOR ASSEMBLY
RPG04-0442 LEVER HANDLE, SCREW, AND INDEX
RPG05-0985 MOUNTING HARDWARE GROUP
RPG63-0099 24” LONG HOSES (2)
RPG05-40005 1.2 GPM VANDAL RESISTANT AERATOR ASSEMBLY
6
3
16
"
157mm
9
1
8
"
231mm
12
3
4
"
324mm
1
3
4
"
45mm
2
3
16
"
55mm
1
3
8
"
35mm
MAXIMUM DECK
THICKNESS
1
1
4
"
32mm
MINIMUM
HOLE DIAMETER
3/8 COMPRESSION FITTINGS
(9/16-24 THREAD)
SB-1004 ROUGH-IN DIAGRAM
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS
OTHERWISE SPECIFIED. DIMENSIONS SUBJECT TO
CHANGE WITHOUT NOTICE.