Installation

92-2840-R2
13of 18
ACM (above counter mixer) with MO (manual override) Installation
1. Install the MO and ACM as described above.
NOTE: In this case the ACM has an extra By-pass outlet: -in total 2 branches of mixed water.
2. There are two branches with mixed water: -one goes to Solenoid inlet, and the other goes to bottom of MO.
3. Form the side of MO the by-pass hose goes to the upper side of Solenoid discharge for manually controlled side
NOTE: For MO is used a Solenoid with a by-pass branch at its outlet.