Installation

MAINTENANCE (CARE & CLEANING)
Your SENSORFLO faucet is designed and engineered in accordance with the highest quality and performance standards. With
proper care it will provide years of trouble free service. Periodically the faucet will require some minor maintenance to keep it
performing at peak performance. The sensor module has a built-in low battery indicator light located in the center of the
rectangle infrared lens. This red light will come on when the faucet has approximately 30,000 on/off cycles remaining or 10%
of battery life. To replace the batteries follow the first portion of the installation instructions above. Periodically check the
solenoid filter for debris. If debris is present clean the filter toughly. The polished chrome finish of your faucet should be
cleaned using mild soap and warm water. Dry immediately with a soft, clean cloth for best results.
92-2070 Rev. 4