Installation

SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
7/27/15 Visit us on the web at www.speakman.com 92-S-3661-R6
FLOW AND TEMPERATURE ADJUSTMENT INSTRUCTIONS
Adjusting Temperature Limit:
1) Remove handle by removing red/blue button and set screw using an Allen key and remove collar by hand
counter-clockwise.
2) With cartridge control shaft in the center and off position, carefully lift and rotate the temperature limit
stop ring to the desired setting using needle nose pliers or by hand. Clockwise rotation of the ring
increases temperature and counterclockwise rotation of the ring lowers temperature (see table and
schematic for details). Re-install handle and test for desired temperature.
Adjusting Flow Limit control:
1) Using a thin flat screwdriver, carefully remove flow limit stop by prying it away from the cartridge
control shaft.
2) Reset flow limit stop higher on the shaft to increase flow or lower to decrease flow.
3) Re-install handle and check for desired flow.
NOTE: The flow limit adjustment is effective when a higher than 1.5 GPM flow outlet is installed in the faucet or
the flow outlet has been removed.
POSITION
@ 45 PSI.
FLOW
LIMIT
TEMP.
LIMIT
0 0% 0%
1 5% 0%
2 12% 3%
3 25% 10%
4 20%
5 30%
6 40%