Installation

SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
12/11/17 www.speakman.com 92-S-3345-07
SPEAKMAN
®
S-3345-CA, S-3345-CA-E
Installation, Maintenance & Operation Instructions
COMMANDER® HEALTHCARE DECK MOUNTED GOOSENECK SPOUT
DESCRIPTION
Speakman chrome plated brass deck mounted swivel / rigid COMMANDER® gooseneck spout. ½” NPSM inlet
with coupling nut. 8” center to center. Water conserving AUTOFLO device reduces flow to 1.5 GPM / 5.7 LPM
maximum to meet existing ANSI A112.18.1M Standard.
SPECIFICATIONS
INLET SUPPLY: COUPLING OR SWEAT CONNECTIONS.
SHIPPING WEIGHT: 1.5 LBS.
STATIC PRESSURE: 20-80 PSI
INSTALLATION
Apply sealant around base underside of flange assembly. Position assembly in hole of sink or countertop and
push down firmly to seal. From under sink slip cup washer onto shank of flange. Screw shank nut on and
tighten. Wipe off excess sealant from around flange base. Connect water supply line to shank and tighten
coupling nut. For rigid gooseneck, locking washer is placed in flange assembly before assembling gooseneck.
Swivel gooseneck, the washer is not used. Assembly gooseneck and wrench tighten collar nut.
MAINTENANCE
The gleaming finish of your SPEAKMAN COMMANDER® HEALTHCARE gooseneck spout can be cleaned by
using mild soap and warm water. Dry immediately with a soft, clean cloth for best results.
REPAIR/REPLACEMENT PARTS
ROUGH-IN MEASUREMENTS
ITEM NUMBER PART NUMBER DESCRIPTION
1 G18-0217-CA GOOSENECK ASSEMBLY
2 RPG05-0837-PC 1.5 GPM AERATOR
3 RPG05-0851-PC 1.5 GPM LAMINAR FLOW OUTLET ASSEMBLY
4 RPG38-0128-PC 0.5 GPM SPRAY OUTLET - “E” MODELS