Installation & Assembly

7
Secure Brackets (2) over Mounting Plate (1)
and tighten pre-installed set screw at bottom
with the included Hex Key.
NOTE: If the shelf unit is not lining up
correctly, the Mounting Plates need to be
re-positioned. Repeat Steps 1 thru 4.
8
If the Glass Shelf (1) is slightly loose,
remove decorative Cap (3) and tighten
the Screw (2). Take care to not over tighten
or damage may occur. Place decorative
Cap back into position over the Screw.
X2
SA-2209 ROUGH-IN DIAGRAM
SPEAKMAN
®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
18"
457mm
23
9
16
"
599mm
4
15
16
"
125mm
3in
70mm