Installation Guide

7
Position the Slide Bar flush against the mounting
surface and push the Slide Bar through the hole
in the Upper Mounting Bracket.
8
Secure the Lower Mounting Bracket (1) in place
to the wall using the Mounting Screws provided
with a Phillips Screwdriver. Reinstall the Lower
Decorative Cover Plate (2) to the Lower
Mounting Bracket.
NOTE: Upper mounting
hole is intentionally off
center to allow for easier
installation.
9
Orient the Hand Held Shower Bracket to your
desired position. Adjustments are made by
rotating the Locking Handle 1/4 turn
counter-clockwise to release the position, and
1/4 turn clockwise to lock into the desired
position.
LOCK
UNLOCK
VS-153-ADA ROUGH-IN DIAGRAM
SPEAKMAN
®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
NOTES:
COMPLIANCE:
ADA COMPLIANT
• Meets the ANSI standard 250 lbs. pull-test for
grab bars and ADA lever handle for adjusting
slide bar.
• The VS-153-ADA Slide Bar meets ADA pull force
requirements only. It is not intended to replace an
ADA Grab Bar.
1.3in
31.75mm
REF
5.1in
128.80mm
REF
HOLDER ARM
LENGTH
3.5in
87.63mm
REF
MOUNT COVER
TYP
32.5in
825.82mm
MAX
OVERALL
HEIGHT
24.1in
611.19mm
LENGTH OF BAR
3.5in
89.66mm
REF
MOUNT HEIGHT
TYP
2.78in
70.73mm
5in
128.80mm
1.34in
33.91mm
2in
50.80mm
TYP.
VS-153-ADA-30 / VS-153-30-RT ROUGH-IN DIAGRAM
SPEAKMAN
®
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.
NOTES:
COMPLIANCE:
ADA COMPLIANT
• Meets the ANSI standard 250 lbs. pull-test for
grab bars and ADA lever handle for adjusting
slide bar.
• The VS-153-ADA Slide Bar meets ADA pull force
requirements only. It is not intended to replace an
ADA Grab Bar.
1.3in
31.75mm
REF
5.1in
128.80mm
REF
HOLDER ARM
LENGTH
3.5in
87.63mm
REF
MOUNT COVER
TYP
32.5in
825.82mm
MAX
OVERALL
HEIGHT
30in
763.59mm
LENGTH OF BAR
3.5in
89.66mm
REF
MOUNT HEIGHT
TYP
2.78in
70.73mm
5in
128.80mm
1.34in
33.91mm
2in
50.80mm
TYP.