Specification Sheet

SPEAKMAN
400 ANCHOR MILL ROAD
NEW CASTLE, DE 19720
800-537-2107
800-977-2747
WWW.SPEAKMAN.COM
OCTOBER 2017
Architect/Engineer Approval Space:
P:
F:
W:
R:
32
6'-6" (2 METERS)
TO FLOOR
4" (102mm) TO
TOP OF TUB
1'-9" (533mm)
SEE NOTE 4
4
1
4
"
107.24mm
ROUGH IN DEPTH
(63mm TO 89mm)
2-1/2" TO 3-1/2"
(63mm TO 89mm)
ROUGH IN DEPTH
1
2
"
13mm
2-1/2"to 3-1/2"
6" (152mm) MIN.
REQUIRED.
LOCATION
OPTIONAL
(SEE NOTE 3)
5
1
2
" (140mm)
DIA. HOLE
FOR ACCESS
TO VALVE
92-2706-R2
SM-3070 ROUGH IN
VACUUM BREAKER AND TOP OF THE HAND SHOWER(HAND SHOWER ADJUSTED TO HIGHEST POSITION).
4. FOR ADA MOUNTING LOCATIONS CONSULT ADAAG, ANSI A117.1, OR STATE REGULATIONS.
3. THE LOCATIONS OF THE WALL POSTS(2) AND SUPPLY ELL ARE OPTIONAL, BUT RESTRICTED BY THE 69" HOSE LENGTH RUNNING
FROM THE SUPPPLY ELL CONNECTION TO THE HAND SHOWER AND THE 6" MINIMUM REQUIREMENT BETWEEN THE IN-LINE
NOTES:
1. ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS OTHERWISE SPECIFIED AND ARE SUBJECT TO CHANGE WITHOUT NOTICE.
2. UNLESS OTHERWISE SPECIFIED ALL INLETS AND OUTLETS ARE 1/2" FEMALE COPPER SWEAT.
TUB OUTLET,
1/2" NPT FEMALE
FRONT VIEW
WALL PLATE
CONNECTION
1"(25mm) DIA.
1/2" COPPER SLIP
(LOCATION OPTIONAL)
TRANSFER VALVE
(191mm)
FINISHED WALL
7-1/2" DIA.
HANDLE
BRASS LEVER
1"(25mm) DIA
ROUGH IN HOLE
ROUGH IN HOLE
MALE
1/2" NPT
1/2" NPT FEMALE
OUTLET TO
1/2" NPT FEMALE
SHOWERHEAD,
SUPPLY ELL,
SIDE OUTLET TO
VALVE,
SHOWER/BATH
1/2" NPT FEMALE
INLET FOR
TUB SPOUT,
SWIVEL
CONNECTOR
SIDE VIEW
136mm
5-3/8"
3
7
16
"
87.31mm
COLD WATER
HOT WATER
INLET
SHOWER OUTLET
TO TRANSFER VALVE
SUPPLY ELL
W/ FLANGE,
1/2" NPT FEMALE
1" (25mm) DIA. HOLE
ROUGH IN HOLE
OPTIONAL STOPS (IS)
2"(51mm) DIA.
INLET
POST(S)
LOCATION OPTIONAL
(SEE NOTE 3)
VACUUM
BREAKER
90mm
3-9/16"
5-3/4"
165mm
(FOR VALVE W/ STOPS)
DIMENSIONS:
NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. 2. Unless otherwise
specified all inlets and outlets are 1/2” female copper sweat. 3. The location of the wall posts(2) and supply ell are optional, but restricted
by the 69” hose length running from the supply ell connection to hand shower and the 6” minimum requirement between the in-line
vacuum breaker and top of the hand shower (hand shower adjusted to the highest position). 4. For ADA mounting locations consult
ADAAG, ANSI A117.1 or state regulations.