Specification

ManualsBrandsSpeakman ManualsBathSentinel Mark II Regency 1-Handle 1-Spray Shower Faucet with Pressure Balance Valve in Polished Chrome

THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL.

400 ANCHOR MILL ROAD | NEW CASTLE, DE 19720

P: 800-537-2107 | F: 800-977-2747

WWW.SPEAKMANCOMPANY.COM

REVISION DATE: DECEMBER 2014

SPECIFICATION

269

Management Systems

Registered to ISO 9001

SEE REVERSE FOR ROUGH-IN DIMENSIONS

SPEAKMAN

Sentinel Mark II

Balanced Pressure Shower System

SM-3020

FEATURES:

• Sentinel Mark II

concealed anti-scald balanced

pressure shower

• Chrome plated brass wall plate with metal index.

• Chrome plated brass lever handle.

• Independent center sleeve allows up to 1 in. of rough-in

variation.

• Adjustable temperature limit stop. Brass body.

• Pressure balancing & ceramic temperature regulating car-

tridge with built-in check valves.

• Can be installed back-to-back.

• Roughing-in template.

• Vandal-resistant standard.

• S-2280 Anystream

wall mounted showerhead with ow con-

trol device reduces ow to 2.5 gpm (9.46 L/min) maximum

• Vandal-resistant standard.

• Four port valve with ½ in. female copper sweat inlets and

shower outlet (tub outlet ½ NPT female).

• Furnished with ½ in. pipe plug.

COMPLIANCE:

• Meets ASSE 1016 & ASME 112.18.1/CSA B125.1 stan-

dards

FINISH:

• Polished Chrome (standard)

OPTIONS:

ADD SUFFIX TO MODEL #

• Integral stops ❑ -IS

• Anchor plate assembly ❑ -AP

• Ball joint ❑ -BJ

• S-2252 showerhead ❑ -2

• Contractor Packs Available

WARRANTY:

• Shower Head: 1 year limited

• Valve: 5 year limited

Summary of content (2 pages)

PAGE 1
SPEAKMAN ® SM-3020 Sentinel Mark II® Balanced Pressure Shower System SPECIFICATION FEATURES: •S entinel Mark II® concealed anti-scald balanced pressure shower • Chrome plated brass wall plate with metal index. • Chrome plated brass lever handle. • Independent center sleeve allows up to 1 in. of rough-in variation. • Adjustable temperature limit stop. Brass body. • Pressure balancing & ceramic temperature regulating cartridge with built-in check valves. • Can be installed back-to-back.
PAGE 2
SPEAKMAN ® Sentinel Mark II® Balanced Pressure Shower System SM-3020 SPECIFICATION 1"(25mm) DIA HOLE FOR SHOWER 5/8"(16mm)TYP 1" TYP (25mm) 2-3/4" (70mm) 6'-6"(1.6 Meters) TO FLOOR 3-1/2"(89mm) 5-1/2"(140mm) DIA HOLE FOR VALVE ACCESS HOT WATER INLET COLD WATER INLET TO SHOWER OPTIONAL STOPS(SCS) W/ FEMALE INLETS FOR 1/2" COPPER WATER TUBE 3-5/16" (84mm) BRASS LEVER HANDLE 4'-6" (1.