Installation Sheet

ManualsBrandsSpeakman ManualsShower & Tub FaucetsSpeakman Kubos EasyInstall Universal Shower Combination

Table Of Contents

SPEAKMAN

Phone: 800-537-2107 Fax: 800-977-2747

09/10/19 www.speakman.com 92C-SLV-1310-UNI-01

SPEAKMAN

SLV-1310-UNI

Installation, Operation & Maintenance Instructions

KUBOS™ COLLECTION COMBINATION SERIES

DESCRIPTION

Speakman Kubos™ Collection Combination Series, SLV-1310-UNI includes: Universal Shower Valve Trim

(CPT-1300-UNI), Shower Arm with Wall Flange (S-2560), and Low-Flow 5 Function Fixed Shower Head

(S-5001-E175). This combination does not include the Shower Valve.

This combination can be retro-fitted to the following competitor's Shower Valve Models.

*Not for use with Diverter/Volume Control Models.

DELTA MultiChoice

R10000-UNBX R10000-UNBXHF

R10000-UNWS R10000-UN

R10000-UNWSHF

KOHLER Rite-Temp

K-304-CS-NA K-304-US-NA

K-304-CX-NA K-304-UX-NA

K-304-PS-NA K-304-K-NA

K-304-PX-NA K-304-KS-NA

MOEN Posi-Temp

2510 2520

2570 2580

2590

SYMMONS Temptrol

4000-BODY 4000-X-BODY

46-2-X-BODY

SPECIFICATIONS

CPT-1300-UNI UNIVERSAL SHOWER VALVE TRIM:

COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard

S-2560 SHOWER ARM WITH WALL FLANGE:

CONNECTIONS: ½” NPT Male Inlet & Outlet

S-5001-E175 LOW-FLOW 5 FUNCTION FIXED SHOWER HEAD:

CONNECTIONS: ½” NPT Female Inlet

FLOW RATE: 1.75 gpm (6.6 L/min)

COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard & WaterSense Certified

INSTRUCTIONS

See individual products for installation of the components and warranty information.

Summary of content (17 pages)

PAGE 1
SPEAKMAN ® SLV-1310-UNI Installation, Operation & Maintenance Instructions KUBOS™ COLLECTION COMBINATION SERIES DESCRIPTION Speakman Kubos™ Collection Combination Series, SLV-1310-UNI includes: Universal Shower Valve Trim (CPT-1300-UNI), Shower Arm with Wall Flange (S-2560), and Low-Flow 5 Function Fixed Shower Head (S-5001-E175). This combination does not include the Shower Valve. This combination can be retro-fitted to the following competitor's Shower Valve Models.
PAGE 2
ROUGH-IN SPEAKMAN 09/10/19 ® Phone: 800-537-2107 Fax: 800-977-2747 www.speakman.
PAGE 3
INSTRUCTIONS FOR MODELS CPT-1000-UNI CPT-1300-UNI Delta Installation TOOLS AND SUPPLIES 1 Phillips Screwdriver Verify that your existing Delta Valve has the correct Cartridge installed. The Universal Valve Trim will only work with Delta’s single function cartridge. If your Valve has a Dual Function Cartridge, you must replace the cartridge with a Delta 1300/1400 Series Cartridge. CORRECT SINGLE FUNCTION CARTRIDGE TO USE.
PAGE 4
7 Re-assemble the Bonnet Collar to the Delta Valve. Orient the Decorative Wall Plate (1) as shown below and insert the RED index button into the top hole of the Wall Plate, and the BLUE index button into the lower hole. Slide Wall Plate Assembly over Wall Mounting Plate (2). RED BLUE 5 Secure the Wall Mounting Plate (1) to the Valve Mounting Plate (2) using the 8-32 X 1-1/8” Screws (3) provided.
PAGE 5
REPAIR PARTS •RPG10-0117 ROUGH-IN DIMENSIONS: CPT-1000-UNI 41" 2 114mm ROUGH-IN DIMENSIONS: CPT-1300-UNI 45" 8 117mm 71" 4 186mm 71" 4 186mm 21" 4 56mm 2" 51mm 71" 4 186mm 31" 2 89mm 31" 2 89mm 1" 25mm •Dimensions are subject to change without notice. 11" 8 28mm •Dimensions are subject to change without notice.
PAGE 6
INSTRUCTIONS FOR MODELS CPT-1000-UNI CPT-1300-UNI Kohler Installation TOOLS AND SUPPLIES Drill Drill Bit Ø1/4” (0.25”) 1 Using a Ø1/4” (ø.25”) Drill Bit, enlarge the 4 holes shown below in the existing Kohler Mounting Flange. 2 Clean front surface of wall. Install Valve Mounting Plate (1) to existing Kohler Valve, using the 10-24 x 1-½” screws (2) provided. Take care to not over tighten mounting screws or damage may occur.
PAGE 7
4 The Universal Valve Trim kit includes two (2) Spindle Adapters that allow for both shallow and deep valve mount installations. Measure the distance between the front lip of the Wall Mounting Plate and the end of the Kohler Spindle as shown below to determine which Spindle Adapter is to be used. 6 Orient the Decorative Wall Plate (1) as shown below and insert the RED index button into the top hole of the Wall Plate, and the BLUE index button into the lower hole.
PAGE 8
REPAIR PARTS •RPG10-0114 ROUGH-IN DIMENSIONS: CPT-1000-UNI 41" 2 114mm ROUGH-IN DIMENSIONS: CPT-1300-UNI 45" 8 117mm 71" 4 186mm 71" 4 186mm 21" 4 56mm 2" 51mm 71" 4 186mm 31" 2 89mm 31" 2 89mm 1" 25mm •Dimensions are subject to change without notice. 11" 8 28mm •Dimensions are subject to change without notice.
PAGE 9
INSTRUCTIONS FOR MODELS CPT-1000-UNI CPT-1300-UNI Moen Installation TOOLS AND SUPPLIES 1 Assemble Moen Adapter (1) to the Valve Mounting Plate (2) taking care to orient it as shown below. Press spring tabs of the Moen Adapter (1) thru the corresponding holes in the Valve Mounting Plate (2). 2 Clean front surface of wall. Install Valve Mounting Plate Assembly (1) to existing Moen Valve (2), using the 8-32 x 2-½” Screws (3) provided.
PAGE 10
3 Secure the Wall Mounting Plate (1) to the Valve Mounting Plate (2) using the 8-32 X 5/8” Screws (3) provided. 5 The Universal Valve Trim kit includes two Spindle Adapters that allow for both shallow and deep mount installations. Observe the distance between the front lip of the Wall Mounting Plate and the end of the Moen Spindle Hub as shown below to determine which Spindle Adapter to use.
PAGE 11
6 Confirm that the Valve is in the correct orientation as described in Step 4. Insert Spline Adapter (1) over Moen spindle (2), aligning it to the flats on the Moen Spindle (2). The extended “lug” on the Spindle Adapter (1) should be positioned to the left of the Moen Valve Stop (4). One set of splines on the adapter must be oriented perfectly vertical when installed, as shown below. Secure the Spline Adapter with the 10-24 X 1/2” Screw (3) provided.
PAGE 12
REPAIR PARTS •RPG10-0115 ROUGH-IN DIMENSIONS: CPT-1000-UNI 41" 2 114mm ROUGH-IN DIMENSIONS: CPT-1300-UNI 45" 8 117mm 71" 4 186mm 71" 4 186mm 21" 4 56mm 2" 51mm 71" 4 186mm 31" 2 89mm 31" 2 89mm 1" 25mm •Dimensions are subject to change without notice. 11" 8 28mm •Dimensions are subject to change without notice.
PAGE 13
INSTRUCTIONS FOR MODELS CPT-1000-UNI CPT-1300-UNI Symmons Installation TOOLS AND SUPPLIES Phillips Screwdriver 1 Flat Tip Measuring Screwdriver Tape Clean front surface of wall. Verify that Symmons Valve Stops (4) are in the “Open” position by turning counter-clockwise. Install Valve Mounting Plate (1) to existing Symmons Valve, using the 8-32 x 1-3/8” screws (2), and Washers (3) provided. Take care to not over tighten mounting screws or damage may occur.
PAGE 14
3 The Universal Valve Trim kit includes two (2) Spindle Adapters that allow for both shallow and deep valve mount installations. Measure the distance between the front lip of the Wall Mounting Plate and the end of the Symmons Spindle as shown below to determine which Spindle Adapter is to be used. 5 Orient the Decorative Wall Plate (1) as shown below and insert the RED index button into the top hole of the Wall Plate, and the BLUE index button into the lower hole.
PAGE 15
REPAIR PARTS •RPG10-0116 ROUGH-IN DIMENSIONS: CPT-1000-UNI 41" 2 114mm ROUGH-IN DIMENSIONS: CPT-1300-UNI 45" 8 117mm 71" 4 186mm 71" 4 186mm 21" 4 56mm 2" 51mm 71" 4 186mm 31" 2 89mm 31" 2 89mm 1" 25mm •Dimensions are subject to change without notice. 11" 8 28mm •Dimensions are subject to change without notice.
PAGE 16
INSTRUCTIONS FOR MODELS S-2560 TOOLS AND SUPPLIES Thread Seal Tape 1 Slide Escutcheon Plate (2) over the long end of the Shower Arm (1). ROUGH IN DIMENSIONS Allen Wrench (Included) 2.50'' [63.50mm] IMPORTANT Be sure to read instructions thoroughly before beginning installation. Do not overtighten any connections or damage may occur. 2 SAFETY TIPS Apply Teflon Tape to inlet side of Shower Arm (1). Thread Shower Arm (1) into Female Pipe Fitting within the wall.
PAGE 17
INSTRUCTIONS FOR MODELS S-5001-E2 S-5001-E175 S-5001-E15 TOOLS AND SUPPLIES Thread Seal Tape (included) 1 Apply Thread Seal Tape to the outlet side of shower arm in a clockwise direction. 2 Thread Shower head onto shower arm by turning it in a clockwise direction. Tighten with adjustable wrench. Turn water supply on and check for leaks. ROUGH IN DIMENSIONS Adjustable Wrench IMPORTANT Be sure to read instructions thoroughly before beginning installation.