Installation Guide

ManualsBrandsSpeakman ManualsPlumbing ProductEyesaver 2-Handle Service Sink Faucet with Eyewash in Chrome and Yellow

SPEAKMAN

400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747

8/30/17 www.speakman.com 92-SEF-9000-01

SPEAKMAN

SEF-9000

Installation, Maintenance & Operation Instructions

EYESAVER COMBINATION EYEWASH AND SERVICE SINK FAUCET

DESCRIPTION

The SEF-9000 is comprised of the SC-5811-RCP and SEF-9200. Please see additional info below.

Summary of content (5 pages)

PAGE 1
SPEAKMAN ® SEF-9000 Installation, Maintenance & Operation Instructions EYESAVER COMBINATION EYEWASH AND SERVICE SINK FAUCET DESCRIPTION The SEF-9000 is comprised of the SC-5811-RCP and SEF-9200. Please see additional info below. SPEAKMAN ® 400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747 8/30/17 www.speakman.
PAGE 2
SPEAKMAN ® SC-5811, SC-5811-RCP Installation, Maintenance & Operation Instructions COMMANDER® CAST BRASS SERVICE SINK FITTING DESCRIPTION Speakman chrome plated cast brass COMMANDER service sink with PERFECT® valves. ¼ turn ceramic cartridges covered by a 25-year Silver warranty. Integral stops. Vandal-resistant four arm handles with color coded indexes. Cast brass nozzle with ¾” hose thread, pail hook and top brace. Brass vacuum breaker. Brass top brace assembly with wall flange and mounting screws.
PAGE 3
OPERATION Simply rotate the handles ¼ turn maximum to operate the sink fitting. MAINTENANCE Valves are washer less and require no routine maintenance. Your SPEAKMAN Commander sink fitting can be cleaned by using mild soap and warm water. Dry immediately with a soft, clean cloth for best results.
PAGE 4
INSTRUCTIONS FOR MODELS SEF-9200 TOOLS AND SUPPLIES Pencil Measuring Tape Phillips Screwdriver Adjustable Wrench 1 After shutting off water supplies, remove the Cold Supply Stop from Faucet. 4 5/16” Hex Key Wrench After applying Thread Sealant Tape, thread the Vacuum Breaker Assembly (1) onto the Stop Adapter. Wrench tighten. Level Thread Seal Tape 2 After cleaning the seat, thread the Stop Adapter into the Cold Supply Stop location of Faucet. Wrench tighten.
PAGE 5
7 Secure Bracket to wood structure (i.e. wall stud) or similar using the supplied screws. ROUGH-IN DIAGRAMS / REPAIR PARTS SPEAKMAN ® Note: If not mountingdirectly directly into structure use NOTE: If not mounting intoaawood wood structure appropriate hardware capableofofsupporting supporting item. use appropriate hardware capable item. 61" 4 161mm 33" (83.8CM) TO 45" (114.3CM) TO FLOOR TWIN HEAD AUTO STAYOPEN EYEWASH 8 Attach remaining end of Hose to the base of the Eyewash. Wrench tighten.