Specification Sheet

SPEAKMAN
400 ANCHOR MILL ROAD
NEW CASTLE, DE 19720
800-537-2107
800-977-2747
WWW.SPEAKMAN.COM
JU LY 2017
Architect/Engineer Approval Space:
P:
F:
W:
R:
528
ROUGH-IN MEASUREMENTS
4-1/2"
19” (SEF-1801)
17” (SEF-1801-8)
(2 HOSES)
2-5/8"
2" MAX. DECK HEIGHT
2-1/4"
8"
12°
4-7/8"
5-1/2"
6" MIN FROM WALL
OR OBSTRUCTION
65°
EYEWASH HOSE
24” MIN - 36” MAX
COUNTERTOP HEIGHT
SEF-1801 SIDE VIEW (LESS HOSES)
FRONT VIEW
8-7/8"
5-1/4"
6” LONG HOSE
NOTE: UNLESS OTHERWISE SPECIFIED, ALL INLETS ARE 3/8”
COMPRESSION WITH FEMALE THREADS. UNLESS OTHERWISE SPECIFIED,
ALL DIMENSIONS ARE IN INCHES AND ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
2" MAX DECK HEIGHT
2-1/4"
65°
7-1/2"
6-7/8"
12°
10"
6" MIN FROM WALL
OR OBSTRUCTION
7-1/4"
10-7/8"
SEF-1801-8 SIDE VIEW (LESS HOSES)
RPG04-0316-PC
4” WRIST BLADE HANDLE GROUP WITH SCREWS, WASHERS, AND INDEX BUTTONS
RPG05-0534-CA
PERFECT VALVE CARTRIDGE ONLY (RED)
RPG05-0535-CA
PERFECT VALVE CARTRIDGE ONLY (BLUE)
G05-0872-PC
1.5 GPM FAUCET AERATOR
RPG05-0908
EYEWASH AERATORS, FLOW CONTROL ADAPTERS, ADAPTER WASHERS, AND FLOW CONTROLS
RPG04-0409
EYEWASH HANDLE WITH YELLOW TEXT AND SET SCREW
RPG05-0910
UPPER EYEWASH COVER WITH FLIP CAPS
RPG05-0909
EYEWASH CARTRIDGE
RPG49-0009
SPOUT QUAD RINGS (3) AND
FRICTION WASHER (2)
G01-0053
MOUNTING HARDWARE GROUP
RPG41-0120
SPOUT INDEX BUTTON
RPG41-0285
HANDLE INDEXES AND SCREWS
REPAIR PARTS
G05-0627
CHECK VALVE (FOR TEE)
4-1/2"
1-1/4" MINIMUM HOLE SIZE
SPOUT SUPPLY
HOSE
HOT SUPPLY
COLD SUPPLY
2" MAX. DECK HEIGHT
1/2” COMPRESSION INLET
1-3/8” HOLES (2)
4"
2-1/4"
EYEWASH HOSE
TEE WITH CHECK
VALVES
TEE WITHOUT
CHECK VALVES
ROUGH-IN MEASUREMENTS
4-1/2"
19” (SEF-1801)
17” (SEF-1801-8)
(2 HOSES)
2-5/8"
2" MAX. DECK HEIGHT
2-1/4"
8"
12°
4-7/8"
5-1/2"
6" MIN FROM WALL
OR OBSTRUCTION
65°
EYEWASH HOSE
24” MIN - 36” MAX
COUNTERTOP HEIGHT
SEF-1801 SIDE VIEW (LESS HOSES)
FRONT VIEW
8-7/8"
5-1/4"
6” LONG HOSE
NOTE: UNLESS OTHERWISE SPECIFIED, ALL INLETS ARE 3/8”
COMPRESSION WITH FEMALE THREADS. UNLESS OTHERWISE SPECIFIED,
ALL DIMENSIONS ARE IN INCHES AND ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
2" MAX DECK HEIGHT
2-1/4"
65°
7-1/2"
6-7/8"
12°
10"
6" MIN FROM WALL
OR OBSTRUCTION
7-1/4"
10-7/8"
SEF-1801-8 SIDE VIEW (LESS HOSES)
RPG04-0316-PC
4” WRIST BLADE HANDLE GROUP WITH SCREWS, WASHERS, AND INDEX BUTTONS
RPG05-0534-CA
PERFECT VALVE CARTRIDGE ONLY (RED)
RPG05-0535-CA
PERFECT VALVE CARTRIDGE ONLY (BLUE)
G05-0872-PC
1.5 GPM FAUCET AERATOR
RPG05-0908
EYEWASH AERATORS, FLOW CONTROL ADAPTERS, ADAPTER WASHERS, AND FLOW CONTROLS
RPG04-0409
EYEWASH HANDLE WITH YELLOW TEXT AND SET SCREW
RPG05-0910
UPPER EYEWASH COVER WITH FLIP CAPS
RPG05-0909
EYEWASH CARTRIDGE
RPG49-0009
SPOUT QUAD RINGS (3) AND
FRICTION WASHER (2)
G01-0053
MOUNTING HARDWARE GROUP
RPG41-0120
SPOUT INDEX BUTTON
RPG41-0285
HANDLE INDEXES AND SCREWS
REPAIR PARTS
G05-0627
CHECK VALVE (FOR TEE)
4-1/2"
1-1/4" MINIMUM HOLE SIZE
SPOUT SUPPLY
HOSE
HOT SUPPLY
COLD SUPPLY
2" MAX. DECK HEIGHT
1/2” COMPRESSION INLET
1-3/8” HOLES (2)
4"
2-1/4"
EYEWASH HOSE
TEE WITH CHECK
VALVES
TEE WITHOUT
CHECK VALVES
DIMENSIONS:
NOTE: 1. Unless otherwise specified, all inlets are 3/8” compression with female threads. 2.All dimensions are in inches (millimeters) unless
otherwise specified and are subject to change without notice.
psi bar gpm L/min in. cm.
30 2.07 2.14 8.1 12 30.5
40 2.76 2.25 8.5 13 33.0
50 3.45 2.49 9.4 15 38.1
60 4.14 2.70 10.2 18 45.7
70 4.83 2.95 11.2 21 53.3
80 5.52 3.09 11.7 24 61.0
FLOWING
PRESSURE
FLOW RATE
PLUME
DISTANCE "A"
SEF-1801
psi bar gpm L/min in. cm.
30 2.07 2.15 8.1 17 43.2
40 2.76 2.24 8.5 18 45.7
50 3.45 2.47 9.3 20 50.8
60 4.14 2.71 10.3 23 58.4
70 4.83 2.95 11.2 27 68.6
80 5.52 3.13 11.8 29 73.7
SEF-1801-8
FLOWING
PRESSURE
FLOW RATE
PLUME
DISTANCE "A"
Eyewash Flow Data
A
NOTE: If plume heights are low, check to ensure that your supply valves are
fully open. If there is a noticeable height difference between the two plumes,
remove the aerators and flow controls and remove any debris that would
inhibit the flow of water.
23
Turn on HOT and COLD handles of faucet and allow water to run for
one minute to flush any debris from faucet. Turn off faucet and install
aerator with supplied aerator wrench.
The spout was designed to swivel from left to right. If a
non-swivel spout is preferred, remove top cover from body.
Remove allen head set screw from position (1) as seen below.
Center the spout between the handles and install the previously
removed set screw into position (2) and tighten (DO NOT
OVERTIGHTEN). Replace cap.
2
1
24
SEF-1800-CA-SL Spray Plume Length and Flow
Flowing Pressure
30 psi 40 psi 50 psi 60 psi 70 psi 80 psi
2.07 Bar 2.76 Bar 3.45 Bar 4.14 Bar 4.83 Bar 5.52 Bar
Flow Rate
2.14 gpm 2.25 gpm 2.49 gpm 2.70 gpm 2.95 gpm 3.09 gpm
8.1 L/min 8.5 L/min 9.4 L/min 10.2 L/min 11.2 L/min 11.7 L/min
Eyewash Distance
Plume ”A”
12” 13” 15” 18” 21” 24”
30.5 cm 33.0 cm 38.1 cm 45.7 cm 53.3 cm 61.0 cm
SEF-1800-CA-SL-8 Spray Plume Length and Flow
Flowing Pressure
30 psi 40 psi 50 psi 60 psi 70 psi 80 psi
2.07 Bar 2.76 Bar 3.45 Bar 4.14 Bar 4.83 Bar 5.52 Bar
Flow Rate
2.15 gpm 2.24 gpm 2.47 gpm 2.71 gpm 2.95 gpm 3.13 gpm
8.1 L/min 8.5 L/min 9.3 L/min 10.3 L/min 11.2 L/min 11.8 L/min
Eyewash Distance
Plume “A”
17” 18” 20” 23” 27” 29”
43.2 cm 45.7 cm 50.8 cm 58.4 cm 68.6 cm 73.7 cm