Installation Sheet

15
16
17
18
Retrieve supplied hose with a 3/8” fitting on one end, and a 1/2”
fitting on the other. Connect 3/8” fitting end to the “F” port of the
COLD tee with check valves. Wrench tighten. Repeat for HOT tee.
X2
Connect the remaining end of the hose (with 1/2” fitting) to the
bottom port of the COLD end body. Wrench tighten. Repeat for the
HOT end body.
X2
Retrieve the supply tee with no check valves. Connect the “F” port of
the supply tee to the remaining hose pre-installed in the base of the
SEF-1801. Wrench tighten.
Retrieve the two (2) remaining supplied hoses. Take the first hose and
connect one end to the “E” port of the supply tee with no check
valves. Connect the other end to the 3/8” port of the HOT end body.
Wrench tighten.