Manualshelf

Installation Sheet

ManualsBrandsSpeakman ManualsShop by CollectionSpeakman Eyesaver 1.5 GPM Utility Faucet
1234567
11
12
13
14
Locate the two tees with check valves (see inset). Connect free end
of the previously installed 6” hoses to the unmarked ports of tees.
Wrench tighten all connections.
X2
Locate the two 3/8” stainless steel hoses. Connect one hose to
the “E” port of the HOT supply tee. Connect the other hose to the “E”
port of the COLD supply tee. Wrench tighten both connections.
X2
Connect free ends of 3/8” hoses to the corresponding HOT & COLD
inlet positions of the SE-370. Wrench tighten both connections.
Connect pre-installed eyewash hose from the base of the spout body
to the outlet port of the SE-370. Wrench tighten connection.
CHECK VALVE