Installation Sheet

Tighten the lower nut (1) to secure the end body to the sink. Be sure
to keep the end body outlet oriented towards the spout. Repeat for
the other end body.
7
8
9
10
1
X2
Mount the SE-370 to wall using 1/2” pipe hangers with wall plates
(not included), no more than 18” below the countertop. Be sure to
mount the SE-370 in a location that will not interfere with the drain
assembly or wall stops. Refer to the rough in on the last page during
installation.
Prepare the SE-370 for mounting by applying Teflon tape to the larger
1/2” threads of adapters. Install and wrench tighten adapters in the
3 positions shown below.
1
2
3
Retrieve the two 6” long stainless steel hoses from the box. Connect
one to the COLD supply valve, and the other to the HOT supply
valve. Wrench tighten both connections.
HOT
COLD