Installation Guide

Connect the remaining end of the hose (with 1/2” fitting) to the

bottom port of the COLD end body. Wrench tighten.

Retrieve supplied hose with a 3/8” fitting on one end, and a 1/2”

fitting on the other. Connect 3/8” fitting end to the “F” port of the

tee with check valves. Wrench tighten.

Connect the remaining end of hose (with 1/2” fitting) to the bottom

port of the HOT end body. Wrench tighten.

Retrieve another supplied hose with a 3/8” fitting on one end, and

a 1/2” fitting on the other. Connect the 3/8” fitting end to the

HOT supply valve. Wrench tighten.

HOT