Installation Guide

MAINTENANCE
Should you need parts to repair this unit, please
reference the parts list below for correct part
numbers. Before any maintenance is done be sure
to shut the water supply off
WARNING: Use only genuine Speakman
parts when repairing or replacing components.
To order parts call 1-800-537-2107.
SE-914-T REPLACEMENT/REPAIR
PARTS
ITEM PART/GROUP # DESCRIPTION
1 20-0845-PC 3/4” Ball Valve
2 04-0467-SS S/S Handle Stop for 1” Ball Valve
3 51-0057 Spring Pin
4 03-0477-RCP Spindle Extension
5 04-0363-RCP Cast Brass Handle
6 01-0684-MO ¼-20 S/S Nut
FLOW DATA
Note: All units meet existing
ANSI Z358.1 Standards and
OSHA Rules. Product
improvements may cause
specification and dimensional
changes without notice.
VALVE:
FLOW PRESSURE PSI (BAR) 30 (2.07)
FLOW RATE GPM (LPM) 30 (114)
NOTE: This unit should be connected to an uninterrupted source of potable water, with a minimum flowing
pressure of 20 PSI and a maximum static pressure of 125 PSI.
1/06
92-1533
Rev-3